Buckinghamshire · England
Bath Re-enamelling for Bolter End homes
We travel to Bolter End for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
Landlords, agents and businesses in Bolter End
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About our bath re-enamelling in Bolter End
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for lots of chips and rust spots and enamel that’s lost its shine and feels rough, across cast iron baths, pressed steel baths and basins & shower trays.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Bolter End (HP14)
- Area hub
- Buckinghamshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Let us know about parking or access
- Let us know if it has been repaired before
- Have a window or extractor fan available
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
Repairing versus replacing in Bolter End
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your pictures
- Same prices wherever you are
- Colour-matched on site
See our pricing and guide to resurfacing and replacement costs.
Towns and villages near Bolter End
More services for Bolter End
Signs you need bath re-enamelling in Bolter End
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Common reasons people in Bolter End contact us are:
- An original cast iron bath that needs restoring
- A coloured bath you want in white
- Staining under the taps and around the waste
- An old resurfacing that is failing
Comparing quotes
- How your room will be protected
- What preparation is included
- The length of the guarantee and what it covers
- What happens if they find more damage
Keeping it looking good
To keep it looking its best:
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
- Keep suction mats out of the bath
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
What affects the price in Bolter End
Resurfacing from £350. There is no charge for travel to Bolter End. The price depends on:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- Whether we combine several jobs
We charge the same wherever you are, so there’s no premium for Bolter End. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- Natural light rather than flash
- Something in shot to show the size
- Your postcode, so we can check dates
- One picture of the entire bath
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Our work in Bolter End
Bolter End is about 4 miles west of High Wycombe, in Buckinghamshire. From the centre of Bolter End to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Bolter End is one of 263 places in Buckinghamshire we cover. Our jobs stretch from Bolter End to London (33 miles away).
All of HP14 is covered. You’ll find streets such as Bolter End Lane, New Road and Finings Road, all of which we cover. Other places close to Bolter End include Wheeler End (1 mile north-east), Cadmore End (1 mile west), Lane End (1 mile south-east), Piddington (1 mile north-east) and Little Frieth (1 mile south). Larger places within reach include Aylesbury (13 miles north), High Wycombe (4 miles east), Chesham (12 miles north-east), Marlow (5 miles south-east), Amersham (11 miles east) and Beaconsfield (9 miles east).
Near you in Bolter End
Our customers here include homes close to The Peacock pub, Church of the Holy Trinity and Lane End Primary School. Bolter End’s nearest station is Saunderton station, roughly 3.6 miles north. Well-known places in the area include High Wycombe Castle (4.3 miles east) and Eden (4 miles east). For a walk, there is Yoesden and Bald Hill.
- Other local spots include West Wycombe Rural (1.7 miles north-east)
Common questions in Bolter End
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Bolter End.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
What happens after I send pictures?
We review the photos and send a fixed quote.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
