York · England
Bath Repair for Bolton Percy homes
Bath repair across Bolton Percy and nearby, usually in one visit.
- Repairs from £95
- Damage beneath the taps
- A failed DIY repair that’s discoloured or lifting
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How we handle bath repair in Bolton Percy
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Common call-outs are for chips along the edge of the bath and chips caused by builders, in whirlpool & spa baths, roll-top & freestanding and pressed steel enamel.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Bolton Percy (YO23)
- County
- York
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
Send us photos and we will tell you honestly.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
How to care for the repair
So the finish stays in good condition for years:
- Get any new chip repaired before it rusts
- Protect the bath with a towel when doing jobs nearby
- Do not leave razors or cans standing in the bath
- Stick to mild cleaners and a soft cloth
There is nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Your questions about bath repair in Bolton Percy
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Do you work in Bolton Percy?
Yes. We cover the whole UK and travel to Bolton Percy. Send photos and we will quote, or call 0345 017 0787.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
How long before I can use the bath?
Normally by the following day, depending on the repair.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Nearby places to Bolton Percy
Also in Bolton Percy
Prices and what affects them
Prices start from £95. There is no charge for travel to Bolton Percy. The price depends on:
- The type of damage
- Unusual colours or finishes
- Where the damage is and how we get to it
- The material
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- A clear, close picture of the problem area
- Something in shot to show the size
- Details of any past repairs
- Natural light rather than flash
Upload a picture of the damage and a wider shot of the whole item, with your YO23 postcode, and we will come back with a fixed quote.
Should you replace it?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Most jobs done in one visit
- One price list for the whole UK
- Accredited with CHAS, Constructionline and SafeContractor
- Repair technicians who travel to you, UK-wide
Take a look at our pricing and bath cost comparison.
Covering Bolton Percy
Bolton Percy is about 8 miles north-west of Selby, in York. Jobs in Bolton Percy are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Bolton Percy is one of 79 places in York where we work. You can also see our page for Leeds, about 15 miles away.
Our visits in YO23 are booked in the same way as anywhere else. From Main Street, Old Road and Low Farm Road or anywhere nearby, a technician can come to you. If you are just outside Bolton Percy, we cover Ozendyke (1 mile south), Appleton Roebuck (1 mile north-east), Ryther (2 miles south-east), Acaster Selby (2 miles east) and Cawood (3 miles south-east). Within a short drive, we also cover York (8 miles north-east), Clementhorpe (7 miles north-east), Bishophill (8 miles north-east), Hungate (8 miles north-east), Clifton (8 miles north-east) and Tang Hall (9 miles north-east).
Around Bolton Percy
In Bolton Percy, that means homes near The Crown Inn and Church of All Saints, among other places. For rail, the closest station is Ulleskelf station, about 1.3 miles south-west of the centre. A little further out are Bishopthorpe Rural District (2.1 miles east) and The Ark Museum (3.2 miles north-west).
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a few hours. If we find something your pictures didn’t show, we will explain it before carrying on.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
Getting a price
If you are in Bolton Percy and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Do you need bath repair in Bolton Percy?
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
Typical reasons for a call-out include:
- An old repair that has yellowed or come loose
- Scuffs and scratches in the surface
- A cracked acrylic bath
- A chipped rim or side
What your quote should include
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
- How changes to the job are handled
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
