North Yorkshire · England
Bath Repair in Ozendyke
Problem with your bath in Ozendyke? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- Scratches you can feel with a fingernail
About our bath repair in Ozendyke
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Our technicians work on acrylic, cast iron enamel and pressed steel enamel, and people most often call us about chips on the rim or sides and a hole punched through by something heavy.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Ozendyke (LS24)
- Region
- North Yorkshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Ozendyke
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which usually takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why Ozendyke customers choose us
- Technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- A year’s guarantee on all work
See our full price list and bath cost comparison.
Towns and villages near Ozendyke
Other services in Ozendyke
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A steel bath rusted through
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Ozendyke
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
FAQs for Ozendyke
What about rust by the waste?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Will the price change on the day?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
What happens next?
You’ll get a fixed quote back, usually with dates to choose from. You are under no obligation.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
How we price bath repair
Repairs from £95. Each job gets its own fixed quote. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A photo taken from further back
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Keep metal cans and razors off the surface
- Get a dripping tap fixed promptly
- Protect the bath with a towel when doing jobs nearby
- Rinse the bath after use, especially in hard water areas
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Covering Ozendyke
Ozendyke is about 7 miles north-west of Selby, in North Yorkshire. We travel to clients in Ozendyke and the surrounding area, so nothing has to leave your home. Ozendyke is one of 626 places in North Yorkshire we cover. Our nearest city page is Leeds, about 15 miles away.
We cover every part of the LS24 postcode area and the streets around it. Close by, we cover Ryther (1 mile east), Bolton Percy (1 mile north), Appleton Roebuck (2 miles north-east), Acaster Selby (3 miles east) and Cawood (3 miles south-east). We also work in nearby towns such as Selby (7 miles south-east), Tadcaster (4 miles north-west), Barlby (7 miles south-east), Brayton (7 miles south-east), Thorpe Willoughby (6 miles south-east) and Hambleton (6 miles south).
Landmarks near Ozendyke
Our customers here include homes close to Church of All Saints. The closest station to Ozendyke is Ulleskelf station, roughly 1.1 miles west. Nearby you will also find Bishopthorpe Rural District (2.4 miles north-east) and The Ark Museum (3.9 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
