Wiltshire · England
Bath chip & crack repair in Boscombe, Wiltshire
Problem with your bath in Boscombe? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- A chipped rim or side
How to look after the repair
Once the work has cured, treat it gently:
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Store metal items away from the bath
- Ensure an acrylic bath is firm underfoot
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Bath repair at your home in Boscombe
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our technicians work on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and the jobs we see most are cracks in an acrylic bath and holes from dropped items.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Boscombe (SP4)
- Region
- Wiltshire
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Boscombe
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
Most people get in touch when they notice something like this:
- A chip where the taps sit
- Rust spots around the plughole
- Chips along the edge of the bath
- Holes from dropped items
Questions to ask before booking
- When it can be used again
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- Who will actually do the work
What affects the price in Boscombe
Prices start from £95. You will know the full cost before you book. We take into account:
- What the surface is made of
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- The postcode, so we can plan the visit
If you’re in Boscombe and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Your questions about bath repair in Boscombe
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we will plan for it.
What areas do you cover?
Across the UK, and that includes Boscombe. Our prices are the same everywhere.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Wiltshire.
How much does bath repair cost in Boscombe?
Prices start from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your SP4 postcode.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a few hours, depending on the damage.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the next day.
How to prepare
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
How to get a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Should you replace it?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
What you get with us
- Colours mixed by hand to suit your surface
- Fixed prices from your pictures
- Same prices wherever you are
- One visit for most repairs
Take a look at our full price list or guide to resurfacing and replacement costs.
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Honest limits
Some jobs are not right for a repair, including:
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
Send us photos and we will tell you honestly before you book.
Materials we work on in Boscombe
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Boscombe and the surrounding area
Boscombe is about 3 miles south-east of Amesbury, in Wiltshire. Clients in Boscombe get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Boscombe is one of 425 places in Wiltshire where we work. Our nearest city page is London, about 74 miles away.
Every address in SP4 is covered, from the main roads to the quietest streets. Streets in the area include Bourne View and Riverside Rise, all of which we cover. We also cover the places around Boscombe: Allington (1 mile north), Idmiston (1 mile south-west), Porton (1 mile south-west), Gomeldon (2 miles south) and Winterbourne Gunner (2 miles south-west). We also work in nearby towns such as Salisbury (6 miles south-west), Amesbury (3 miles north-west), Bugmore (6 miles south-west), Milford (6 miles south-west), Old Sarum (4 miles south-west) and Harnham (7 miles south-west).
Near you in Boscombe
Locally, our jobs take us to homes close to St Nicholas Church of England Primary School and Church of St Andrew. The closest station to Boscombe is Grateley station, roughly 4.5 miles north-east. The countryside around Boscombe includes Boscombe Down West and Winterbourne Downs RSPB reserve.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Towns and villages near Boscombe
What else we do in Boscombe
About our accreditations · Every repair comes with a one-year guarantee.
