Staffordshire · England
Bath Repair in Bowers
Bath repair in Bowers without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- A chip where the taps sit
- Rust by the waste and overflow
The process
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
Getting a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
About our bath repair in Bowers
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our technicians work on cast iron enamel, acrylic and whirlpool & spa baths, and people most frequently call us about chips under the taps and deep scratches in acrylic.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Bowers (ST21)
- Region
- Staffordshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Bowers
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
The most common problems we’re called about are:
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
- Chips under the taps
- Chips on the rim or sides
Before booking anyone
- Is the price fixed, and does it include VAT?
- How your room will be protected
- How long it needs to cure
- What aftercare is recommended
Our work in Bowers
Bowers is about 5 miles west of Stone, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 512 towns and villages across Staffordshire. You can also see our page for Birmingham, about 35 miles away.
We cover every part of the ST21 postcode area. If you are just outside Bowers, we cover Standon (1 mile south-west), Cranberry (1 mile north-east), Cotes Heath (1 mile east), Walford (1 mile south) and Cotes (2 miles east). We also work in nearby towns such as Stafford (10 miles south-east), Newcastle-under-Lyme (7 miles north), Longton (8 miles north-east), Stone (5 miles east), Biddulph (14 miles north) and Alsager (13 miles north).
Local landmarks in Bowers
Locally, our jobs take us to homes close to All Saints CofE (C) First School and Church of All Saints, among other places. The nearest railway station is Barlaston station, roughly 4.7 miles east. Other landmarks nearby include Castle Hill (3.5 miles west). Not far away are Cop Mere and Jackon's Coppice and Marsh.
What bath repair costs
Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:
- The type of damage
- Whether we combine several jobs
- How hard the colour is to match
- Any earlier repairs that need removing first
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
Before you send pictures, a few simple things make all the difference:
- Any details about the material
- Whether it’s been repaired or coated before
- Natural light rather than flash
- One picture of the entire bath
Most clients in Bowers get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Landlord and trade work in Bowers
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
If you manage property in Bowers, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Repairing versus replacing in Bowers
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Free fixed quotes from pictures
- A year’s guarantee on all work
- One price list for the entire UK
- Everything repaired in place
Take a look at our full price list or guide to resurfacing and replacement costs.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Also near Bowers
Other services in Bowers
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Bowers questions
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help.
Do you work in Bowers?
Yes. We work across the UK and travel to Bowers and the rest of Staffordshire. Send pictures and we will quote, or call 0345 017 0787.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
When can I have a bath again?
Generally the following day. We will tell you the exact curing time when we finish.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
About our accreditations · Every repair comes with a one-year guarantee.
