Staffordshire · England
Bath chip & crack repair in Standon, Staffordshire
Damaged bath in Standon? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
Bath repair at your home in Standon
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We’re frequently asked to fix chips under the taps and cracks in an acrylic bath, on roll-top & freestanding, pressed steel enamel and acrylic.
Big or small, you get the same one-year guarantee in Standon and across Staffordshire.
- Location
- Standon (ST21)
- Region
- Staffordshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. You can expect it to take a morning or an afternoon, and we’ll keep you posted as we go.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let us know which floor the room is on
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Also near Standon
Also in Standon
Signs you need bath repair in Standon
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Keep an eye out for any of the following:
- Rust spots around the plughole
- An old repair that has yellowed or come loose
- Chips caused by builders
- A chip where the taps sit
Before you book anyone
- What happens if the damage is worse than the photos show
- What the guarantee covers, and for how long
- How to look after the finish
- How the room is protected while they work
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Aftercare tips
Simple care helps the repair last. We recommend:
- Clean with warm water and a mild detergent
- Give the bath a quick rinse after use
- Have new chips seen to early
- Don’t leave razors or cans standing in the bath
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Colour-matched on site
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
Take a look at our pricing and bath cost comparison.
Common questions in Standon
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Is a repair better than a new one?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
How long does the repair take to cure?
Most baths can be used the following day. We’ll tell you the exact curing time when we finish.
Something went through my bath. Can it be fixed?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
About Standon
Standon is about 6 miles west of Stone, in Staffordshire. Whether you are in the middle of Standon or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Standon is one of 512 places in Staffordshire where we work. Our jobs stretch from Standon to Birmingham (35 miles away).
We cover every part of ST21 and the streets around it. We regularly work on streets such as Chatcull Lane, Maer Lane and Mill Lane and the roads around them. If you are just outside Standon, we cover Bowers (1 mile north-east), Walford (1 mile south-east), Cranberry (1 mile north-east), Cotes Heath (1 mile east) and Cotes (2 miles east). Within a short drive, we also cover Stafford (10 miles south-east), Newcastle-under-Lyme (8 miles north), Longton (8 miles north-east), Stone (6 miles east), Biddulph (15 miles north) and Alsager (13 miles north).
Landmarks near Standon
Locally, our jobs take us to homes close to All Saints CofE (C) First School and Church of All Saints, among other places. Further afield, we also cover the area around Castle Hill (3.3 miles north-west). Green spaces nearby include Jackon's Coppice and Marsh and Cop Mere.
What we can’t put right
We’d rather lose a job than do one that won’t last, so these are the limits:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
Send us photos and we will tell you honestly before booking.
Materials we work on in Standon
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
