Surrey · England
Bath chip & crack repair in Bramshott Chase, Surrey
Bath repair for Bramshott Chase, without a refit. Get a fixed price from your pictures, then we come to you.
- Repairs from £95
- Scratches you can feel with a fingernail
- A cracked acrylic bath
Bath repair in Bramshott Chase without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. We are often asked to fix damage done while the bathroom was being fitted and a chipped rim or side, in acrylic, whirlpool & spa baths and roll-top & freestanding.
We stand behind the work with a one-year guarantee.
- Where
- Bramshott Chase (GU26)
- Region
- Surrey
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Bramshott Chase
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you cover the whole of Surrey?
All of Surrey, and the rest of the UK. Travel is included in the price.
Can you repair a hole in a bath?
Typically. Photos of the hole and the underside help us check.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
How long does the repair take to cure?
Most baths can be used the next day. We confirm the time before we leave.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Repairing versus replacing in Bramshott Chase
People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Bramshott Chase
- Repair technicians who travel to you, UK-wide
- Everything repaired in place
- We leave the room as we found it
- A year’s guarantee on all work
Read our prices page and resurfacing vs replacement cost guide.
Bramshott Chase and nearby
Bramshott Chase is about 8 miles south of Farnham, in Surrey. Jobs in Bramshott Chase are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our technicians cover 395 places in Surrey, from the larger towns to small villages. Our nearest city page is London, about 40 miles away.
All of GU26 is covered. You will find streets such as Upper Hammer Lane, Old Bramshott Chase and Portsmouth Road, and we cover them all. If you are just outside Bramshott Chase, we cover Hammer Bottom (1 mile south), Hammer (1 mile south), Shottermill (1 mile south-east), Woolmer Hill (1 mile south) and Haslemere (2 miles south-east). We also work in nearby towns such as Guildford (13 miles north-east), Farnham (8 miles north), Frimley (15 miles north), Cranleigh (12 miles east), Ash (10 miles north) and Godalming (9 miles north-east).
Near you in Bramshott Chase
In Bramshott Chase, that means homes near The Prince of Wales pub, Woolmer Hill School and Shottermill Junior School and the streets around them. Also close by are Church of St Luke (0.9 miles north) and Woolmer Hill School (within half a mile south-east). The closest station to Bramshott Chase is Haslemere station, roughly 1.7 miles east of the centre. A little further out are Haslemere and District Hospital (2.1 miles east). Green spaces nearby include Upper Lake and Gibbet Hill.
Common problems we fix in Bramshott Chase
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
People usually call us when they notice one of these:
- A kit repair that didn’t last
- Chips under the taps
- A hole punched through by something heavy
- Chips along the edge of the bath
Questions to ask before you book
- What aftercare is recommended
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
- What prep work is covered
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a few hours. If we find something your pictures didn’t show, we will explain it before carrying on.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Let us know about parking or access
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Also near Bramshott Chase
Other services in Bramshott Chase
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we can’t get to from below
Send us photos and we will tell you honestly before booking.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- Previous DIY repairs that have to come out
- How many items we do on one visit
- What kind of damage it is
Our prices are the same across the UK, so there’s no premium for Bramshott Chase. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- One picture of the whole bath
- The material, if you know it
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Looking after it afterwards
So the finish stays in good condition for years:
- Do not scrub with anything abrasive
- Get any new chip repaired before it rusts
- Rinse it down after each bath
- A dripping tap stains enamel, so fix it early
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
