Surrey · England
Bath Repair in Woolmer Hill
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Woolmer Hill. Free, fixed quotes from your photos.
- Repairs from £95
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
Bath repair in Woolmer Hill, done in place
A typical bath repair is a few hours’ work, and you can generally bathe again the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. Typical jobs include holes from dropped items and chips under the taps, on pressed steel enamel, acrylic and whirlpool & spa baths.
We stand behind the work with a one-year guarantee.
- Area
- Woolmer Hill (GU27)
- County
- Surrey
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Woolmer Hill
We carry out planned and one-off repairs for housing associations and facilities teams in Surrey and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Towns and villages near Woolmer Hill
Other services in Woolmer Hill
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Keeping it looking good
Aftercare is simple:
- Store metal items away from the bath
- Get a dripping tap fixed promptly
- Get any new chip repaired before it rusts
- Clean with warm water and a mild detergent
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Common problems we fix in Woolmer Hill
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Look out for these signs:
- A chip where the taps sit
- Rust by the waste and overflow
- Snagging damage from a refit
- A chipped rim or side
What your quote should include
- How long it needs to cure
- The length of the guarantee and what it covers
- Who will actually do the work
- If travel is included in the price
Woolmer Hill and nearby
Woolmer Hill is about 1 mile south-west of Haslemere, in Surrey. Wherever you are in the GU27 postcode area, we carry out the work at your property. Woolmer Hill is one of 395 places in Surrey where we work. You can also see our page for London, about 41 miles away.
Every address in GU27 is covered. Jobs here include addresses on Moor Road, Copse Road and Hammer Lane. We also travel to Hammer (1 mile north), Hammer Bottom (1 mile north-west), Shottermill (1 mile north-east), Linchmere (1 mile south-west) and Bramshott Chase (1 mile north). Larger places within reach include Guildford (14 miles north-east), Farnham (9 miles north), Cranleigh (12 miles east), Ash (12 miles north), Godalming (9 miles north-east) and Farncombe (10 miles north-east).
Around Woolmer Hill
We visit homes around Mill Tavern, Woolmer Hill School and Camelsdale Primary School, among other places. You will also find St Paul (0.7 miles east) and Woolmer Hill School (0.9 miles north). The closest station to Woolmer Hill is Haslemere station, roughly 1.5 miles north-east of the centre. A little further out are Haslemere and District Hospital (2 miles north-east). For a walk, there is Lynchmere Commons and Wheeler's Down.
Woolmer Hill: your questions answered
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Surrey.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
How much does bath repair cost in Woolmer Hill?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
What a repair cannot fix
We would rather lose a job than do one that won’t last, so these are the limits:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
What happens on the day
We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and we start. You can expect it to take a morning or an afternoon, and we will keep you posted as we go.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
- Tell us about parking, stairs or access
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Read more
How we price bath repair
Repairs from £95. There is no area surcharge for Woolmer Hill. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- The material and finish
- Previous DIY repairs that have to come out
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can typically get a fixed price without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- Any details about the material
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
