Lincolnshire · England
Bath chip & crack repair in Branston, Lincolnshire
Damaged bath in Branston? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A cracked acrylic bath
- Chips along the edge of the bath
What bath repair costs
Prices start from £95. There’s no area surcharge for Branston. What changes the price is:
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- How many areas need work
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
When you take your pictures, a few simple things make all the difference:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- Natural light rather than flash
- Your postcode, so we can check dates
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
Bath repair at your home in Branston
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the next day. Typical jobs include a kit repair that didn’t last and deep scratches in acrylic, on whirlpool & spa baths, pressed steel enamel and cast iron enamel.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Branston (NG32)
- County
- Lincolnshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a morning or an afternoon.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Make sure the area is dry
- Let us know which floor the room is on
- Clear the area around the damage
Ask for a price
The quickest way to a price is to send a couple of pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Read more
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
For anyone letting property in or around Branston, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
About Branston
Branston is about 7 miles north-east of Melton Mowbray, in Lincolnshire. Across the NG32 area, we carry out the work at your property. Our repair technicians cover all 732 towns and villages in Lincolnshire. Our jobs stretch from Branston to Birmingham (53 miles away).
Every address in NG32 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Knipton (2 miles north-east), Croxton Kerrial (2 miles east), Bescaby (2 miles south), Harston (2 miles north-east) and Belvoir (3 miles north). We also work in nearby towns such as Grantham (8 miles north-east), Spittlegate (7 miles north-east), Gonerby Hill Foot (8 miles north-east), Earlesfield (7 miles north-east), Great Gonerby (8 miles north-east) and Manthorpe (9 miles north-east).
Near you in Branston
We visit homes around Church of St Guthlac and The Wheel Inn and the streets around them. A little further out are Belvoir Castle (2.8 miles north).
Nearby places to Branston
What else we do in Branston
Common problems we fix in Branston
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
The most common problems we’re called about are:
- An old repair that has yellowed or come loose
- Hairline or through cracks in acrylic
- Snagging damage from a refit
- Chips on the rim or sides
What your quote should include
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- How your room will be protected
- The length of the guarantee and what it covers
Repair or replace in Branston?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why Branston customers choose us
- CHAS and Constructionline accredited
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- Colour-matched on site
Read our pricing and resurfacing vs replacement cost guide.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Honest limits
In fairness, there are a few things a repair will not fix:
- Cracks in acrylic we cannot reach from underneath
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Common questions in Branston
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
I tried a repair kit. Can you fix it?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Will the price change on the day?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
About our accreditations · Every repair comes with a one-year guarantee.
