Hampshire · England
Bath Repair for Breamore homes
Problem with your bath in Breamore? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Rusty patches near the plughole
- A kit repair that didn’t last
How we handle bath repair in Breamore
You do not need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. Common call-outs are for chips on the rim or sides and deep scratches in acrylic, across cast iron enamel, pressed steel enamel and roll-top & freestanding.
Every repair comes with a one-year guarantee.
- Area
- Breamore (SP6)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Breamore
We work for landlords, letting agents and housing providers in Breamore as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Places near Breamore
More services for Breamore
Breamore: your questions answered
Which areas do you work in?
Everywhere in the UK, Breamore included. There’s no extra charge for travel.
Do you work in Breamore?
Yes. We work across the UK and travel to Breamore and the rest of Hampshire. Send us pictures for a fixed quote, or call 0345 017 0787.
What happens after I send pictures?
We review the pictures and send a fixed quote with dates.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send photos.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Breamore.
Looking after it afterwards
Looking after the surface is easy:
- Stick to mild cleaners and a soft cloth
- Rinse it down after each bath
- If an acrylic bath flexes, have its feet adjusted
- Cover the bath during DIY or decorating
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
Repair or replace: which is better?
People often assume a cracked or chipped bath has to come out. Normally it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- We’ll tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- Work done at your home or business
Read our prices page or resurfacing vs replacement cost guide.
What bath repair costs
Repairs from £95. There’s no area surcharge for Breamore. What changes the price is:
- Any earlier repairs that need removing first
- How hard the colour is to match
- Access to the area
- How many items we do on one visit
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- Something in shot to show the size
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
What a repair can’t fix
In fairness, there are a few things a repair will not fix:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
The process
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. You can expect it to take a few hours, depending on the damage, and we will tell you if anything changes.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the day after.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Let us know about parking or access
- Keep children and pets away from the room on the day
Getting a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
Where we work around Breamore
Breamore is about 7 miles north-east of Verwood, in Hampshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 683 places across Hampshire, from the larger towns to small villages.
Every address in SP6 is within our area, from the main roads to the quietest streets. That includes homes on Salisbury Road, The Shallows and Marsh Lane. We also cover the places around Breamore: Upper Burgate (1 mile south), Woodgreen (1 mile east), Upper Street (1 mile north-west), Lower Burgate (1 mile south) and Tinkers Cross (2 miles south-west). Within a short drive, we also cover Totton (12 miles east), Romsey (13 miles east), New Milton (15 miles south), Ringwood (8 miles south), Marchwood (15 miles east) and Ashley (15 miles south-east).
Landmarks near Breamore
Typical jobs here are in homes near The Burgate School and Sixth Form, Breamore Church of England Primary School and Bat and Ball pub. Other landmarks nearby include Godshill Castle Hill (1 mile south-east) and Fordingbridge Museum (2.1 miles south).
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
