Hampshire · England
Bath chip & crack repair in Upper Street, Hampshire
Our technicians come to Upper Street for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Impact holes in acrylic
- A kit repair that didn’t last
Common problems we fix in Upper Street
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
You may need us if you’ve spotted:
- A chipped rim or side
- Cracks in an acrylic bath
- A kit repair that didn’t last
- Rusty patches near the plughole
What your quote should include
- Whether they match the colour on site
- How soon you can use it again
- What happens if the damage is worse than the photos show
- If travel is included in the price
About our bath repair in Upper Street
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. Common call-outs are for scratches you can feel with a fingernail and rust by the waste and overflow, across pressed steel enamel, cast iron enamel and whirlpool & spa baths.
All our work is covered by a one-year guarantee, wherever you are in Hampshire.
- Where
- Upper Street (SP6)
- Region
- Hampshire
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath repair costs
Repairs from £95. You will not pay by the hour. The price is based on:
- How hard the colour is to match
- The size and number of damaged areas
- What the surface is made of
- Where the damage is and how we get to it
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- Good light, ideally daylight, without flash glare
- A picture taken from further back
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
To get a price, send a couple of photos through our quote form or call us. We will say right away if a repair is the right fix.
Honest limits
We will always be straight with you, so here’s what a repair cannot fix:
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we can’t get to from below
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Repairing versus replacing in Upper Street
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Prices start from £95. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Honest advice, even when it means no job
- Free fixed quotes from pictures
- Rooms protected and left tidy
- No extra charge for your area
See our pricing or guide to resurfacing and replacement costs.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
- Get a dripping tap fixed promptly
- Cover the bath during DIY or decorating
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Upper Street questions
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Upper Street.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
How long before I can use the bath?
Normally by the following day, though it depends on what we’ve done.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Upper Street as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Places near Upper Street
What else we do in Upper Street
Our work in Upper Street
Upper Street is about 7 miles north-east of Verwood, in Hampshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 683 towns and villages across Hampshire, from the larger towns to small villages.
Our visits in SP6 work the same way as everywhere else we cover. If you’re just outside Upper Street, we cover Breamore (1 mile south-east), Upper Burgate (1 mile south), Woodgreen (2 miles east), Lower Burgate (2 miles south) and Tinkers Cross (2 miles south). Within a short drive, we also cover Totton (13 miles east), Romsey (14 miles east), Ringwood (8 miles south), Ashley (15 miles south-east), North Baddesley (15 miles east) and St Leonards (10 miles south).
Local landmarks in Upper Street
Locally, our jobs take us to homes close to The Burgate School and Sixth Form, Breamore Church of England Primary School and Bat and Ball pub, among other places. Nearby you will also find Fordingbridge Museum (2.5 miles south) and Salisbury District Hospital (5.5 miles north).
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours. If anything looks different from your photos, we will talk to you before going ahead.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
How to prepare
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Clear the area around the damage
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
