Cheshire East · England
Bath Repair for Brindley homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Brindley, carried out at your home and guaranteed for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
About our bath repair in Brindley
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in a single visit. Whether it’s a cracked acrylic bath and deep scratches in acrylic, we can usually put it right, on pressed steel enamel, acrylic and cast iron enamel alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Brindley (CW5)
- Region
- Cheshire East
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Brindley and the surrounding area
Brindley is about 4 miles west of Nantwich, in Cheshire East. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Brindley is one of 254 towns and villages in Cheshire East where we work. We work right across the region, from Brindley to Liverpool (about 26 miles away).
All of CW5 is covered. From Brook Lane, Wrexham Road and Windsor Drive or anywhere nearby, a technician can come to you. Brindley sits on or near the A534, which makes travel easy. We also cover the places around Brindley: Faddiley (1 mile south-west), Larden Green (1 mile south), Radmore Green (1 mile north), Chorley (2 miles south-west) and Croxton Green (3 miles west). Larger places within reach include Crewe (7 miles east), Nantwich (4 miles east), Middlewich (10 miles north-east), Sandbach (11 miles north-east), Coppenhall (7 miles east) and Holmes Chapel (13 miles north-east).
What’s near Brindley
Brindley’s nearest station is Nantwich station, roughly 3.7 miles east. Other landmarks nearby include Nantwich Workhouse (3.6 miles east) and Nantwich Castle (3.5 miles east).
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Landlords, agents and businesses in Brindley
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take a few hours, tidy-up included.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Have a window or extractor fan available
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Avoid scourers, wire wool and gritty cream cleaners
- Put a towel in the bath if you’re working above it
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Questions from Brindley
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Do you work in Brindley?
Yes. We cover the entire UK and travel to Brindley. Send us photos for a fixed quote, or call 0345 017 0787.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Can a cracked acrylic bath be fixed?
Normally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Is the work guaranteed?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
What we’re called out for in Brindley
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
You may need us if you’ve spotted any of these:
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
- A cracked acrylic bath
- Impact holes in acrylic
What your quote should include
- What the guarantee covers, and for how long
- How long it needs to cure
- Whether the colour is mixed to match
- Whether a trained technician does the job
When a repair isn’t the answer
Some jobs aren’t right for a repair, for example:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
- A steel bath rusted through
Send us photos and we’ll tell you honestly before you book.
What we work on
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Towns and villages near Brindley
More services for Brindley
How we price bath repair
Prices start from £95. We give every job a fixed quote from photos. These are the things that affect it:
- Where the damage is and how we get to it
- The material and finish
- The size and number of damaged areas
- Unusual colours or finishes
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed quote
Phone pictures are fine. Just make sure we can see:
- Something in shot to show the size
- A wider photo showing the entire bath
- Your postcode, so we can check dates
- Any details about the material
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
