Derbyshire · England
Bath Repair in Brockhurst
Bath repair in and around Brockhurst: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Rusty patches near the plughole
Common questions in Brockhurst
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How we handle bath repair in Brockhurst
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the next day. Whether it’s cracks in an acrylic bath and impact holes in acrylic, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Brockhurst (S45)
- Area hub
- Derbyshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Also in Brockhurst
Covering Brockhurst
Brockhurst is about 5 miles south-west of Chesterfield, in Derbyshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 532 towns and villages in Derbyshire, from the larger towns to small villages. You can also see our page for Manchester, about 36 miles away.
All of S45 is within our area. That includes homes on Kelstedge Lane and Eaton Lane. Nearby, we also work in Slack (1 mile south), Uppertown (1 mile north-west), Alicehead (1 mile north), Lumsdale (2 miles south-west) and Tansley (3 miles south). We also work in nearby towns such as Chesterfield (5 miles north-east), Belper (10 miles south), Heanor (13 miles south-east), Dronfield (9 miles north), Ripley (10 miles south-east) and Bolsover (10 miles north-east).
What’s near Brockhurst
Around Brockhurst, we work in homes near Highfields School, Ashover Primary School and Church of All Saints. For rail, the closest station is Matlock station, roughly 3.5 miles south-west of the centre. Other landmarks nearby include Whitworth Hospital (3.5 miles south-west) and The Working Carriage Museum (3.9 miles west). Not far away are Beeley Moor.
How we price bath repair
Repairs from £95. We price every job individually. What matters most is:
- Unusual colours or finishes
- The size and number of damaged areas
- The material and finish
- Where the damage is and how we get to it
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
How to get a fixed quote
You can generally get a fixed quote without us visiting. To help us price it:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Any details about the material
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
What we cannot put right
A repair is not right for every job, for example:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Brockhurst
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
Landlord and trade work in Brockhurst
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. Most visits take a morning or an afternoon, including clearing up.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Let the surface dry out before the visit
- Keep a parking space free if you can
- Clear the area around the damage
Ask for a price
To get a price, send two or three photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Keep metal cans and razors off the surface
- Rinse it down after each bath
- Fix dripping taps early to stop staining and limescale
- Don’t leave a fresh chip for long
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
Why book with us
- One-year guarantee on every repair
- Work done at your home or business
- We leave the room as we found it
- No need to remove anything
See our pricing and resurfacing vs replacement cost guide.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
