Kent · England
Bath chip & crack repair in Broom Street, Kent
Chip and crack repairs to enamel, acrylic and cast iron baths in Broom Street, carried out at your home and guaranteed for a year.
- Repairs from £95
- Deep scratches in acrylic
- Chips caused by builders
Where we work around Broom Street
Broom Street is about 2 miles east of Faversham, in Kent. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. Broom Street is one of 922 towns and villages in Kent we cover. Our nearest city page is London, about 46 miles away.
All of ME13 is covered, from the main roads to the quietest streets. We also cover the places around Broom Street: Graveney (1 mile south-east), Culmers (1 mile south-east), Goodnestone (1 mile south), Slutshole (2 miles south-east) and Hernhill (2 miles south-east). Within a short drive, we also cover Ashford (13 miles south), Canterbury (7 miles south-east), Sittingbourne (9 miles west), Whitstable (5 miles north-east), Herne Bay (9 miles east) and Minster (9 miles north-west).
What’s near Broom Street
Our clients here include homes close to Queen Elizabeth's Grammar School, Church of All Saints and South Swale, among other places. For rail, the closest station is Faversham station, roughly 2.1 miles south-west. A little further out are Whitstable and Tankerton Hospital (5.6 miles north-east).
Bath repair at your home in Broom Street
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding, and people most frequently call us about damage done while the bathroom was being fitted and scuffs and scratches in the surface.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Location
- Broom Street (ME13)
- County
- Kent
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we look at:
- The colour and finish to match
- The material and finish
- Whether it’s a chip, crack, burn or wear
- How much damage there is
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
We price nearly every job from photos. This is what to send:
- Any earlier repairs or coatings
- One picture of the entire bath
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
Send us photos of the damage and one of the whole item, with your ME13 postcode, and we will come back with a fixed quote.
Looking after it afterwards
Nothing complicated is needed:
- Get any new chip repaired before it rusts
- Store metal items away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Ensure an acrylic bath is firm underfoot
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Common questions in Broom Street
Do you come to Broom Street?
Yes, we do. We send a technician to Broom Street for every job, and the price is the same as everywhere else.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What information do you need?
Use the quote form or ring 0345 017 0787.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you repair a crack in an acrylic bath?
Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
What we do, step by step
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the next day, the bath is ready to use.
Preparing for the visit
- Let us know about parking or access
- Keep pets and children out of the room while we work
- Make sure the room can be ventilated
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
Places near Broom Street
Also in Broom Street
What a repair can’t fix
A few problems are outside what a surface repair can do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- CHAS and Constructionline accredited
- Everything repaired in place
- A fixed quote before booking
- We leave the room as we found it
Read our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
