Kent · England
Bath Repair for Culmers homes
Bath repair in and around Culmers: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- Chips caused by builders
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Bath repair in Culmers without replacing anything
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. Typical jobs include rust by the waste and overflow and scuffs and scratches in the surface, in cast iron enamel, acrylic and whirlpool & spa baths.
Big or small, it’s backed by a one-year guarantee.
- Where
- Culmers (ME13)
- County
- Kent
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Culmers
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
We work for landlords, letting agents and housing providers in Culmers as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a morning or an afternoon, including clearing up.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Related advice
Repair or replace in Culmers?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Our bath repair starts from £95. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why us?
- Honest advice, even when it means no job
- A year’s guarantee on all work
- We leave the room as we found it
- Technicians who travel to you, UK-wide
Take a look at our pricing and guide to resurfacing and replacement costs.
Aftercare tips
Simple care helps the repair last. We recommend:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Check that an acrylic bath doesn’t move when you stand in it
- Keep abrasive pads and gritty cleaners away from the bath
- Fix dripping taps early to stop staining and limescale
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
What we can’t put right
A repair isn’t always the answer, and we will tell you before we start. Repairs won’t solve:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
- Cracks in acrylic we can’t reach from underneath
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
Where we work around Culmers
Culmers is about 2 miles east of Faversham, in Kent. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Our repair technicians cover 922 places in Kent, from the larger towns to small villages. Our jobs stretch from Culmers to London (46 miles away).
Every address in ME13 is within our area. Neighbouring places we cover include Graveney (1 mile north-east), Goodnestone (1 mile south-west), Broom Street (1 mile north-west), Slutshole (1 mile south-east) and Hernhill (1 mile south-east). Larger places within reach include Ashford (13 miles south), Canterbury (7 miles south-east), Sittingbourne (9 miles west), Whitstable (4 miles north-east), Herne Bay (9 miles east) and Minster (9 miles north-west).
Near you in Culmers
Locally, our jobs take us to homes close to Church of All Saints, Graveney Primary School and Queen Elizabeth's Grammar School. The closest station to Culmers is Faversham station, roughly 2.2 miles west of the centre. Nearby you will also find Whitstable and Tankerton Hospital (5.5 miles north-east). Green spaces nearby include Blean Woods RSPB Reserve.
Common questions in Culmers
What areas do you cover?
The whole UK, including all of Kent. Just include your postcode and we’ll confirm dates.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
What happens after I send photos?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Can you redo an old repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
How long before I can use the bath?
Normally by the following day, depending on the repair.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before booking. We take into account:
- The size and number of damaged areas
- What the surface is made of
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
We charge the same wherever you are, so there’s no premium for Culmers. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- The material, if you know it
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
What we’re called out for in Culmers
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Typical reasons for a call-out include:
- Chips under the taps
- A cracked acrylic bath
- A failed DIY repair that’s discoloured or lifting
- Deep scratches in acrylic
What your quote should include
- How the colour is matched
- How your room will be protected
- The length of the guarantee and what it covers
- Whether a trained technician does the job
Nearby places to Culmers
What else we do in Culmers
About our accreditations · Every repair comes with a one-year guarantee.
