Redcar and Cleveland · England
Bath Repair for Brotton homes
Local bath repair for Brotton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A chipped rim or side
- A failed DIY repair that is discoloured or lifting
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
Why us?
- Colour mixed on the day to match
- Every repair guaranteed for a year
- Same prices wherever you are
- Straight answers about what a repair can do
Read our full price list or bath cost comparison.
About our bath repair in Brotton
A damaged bath does not have to mean a new bathroom. Our technicians fill, shape and refinish the damage, with the colour mixed on site. Our technicians work on roll-top & freestanding, acrylic and cast iron enamel, and common reasons people contact us are an old repair that has yellowed or come loose and rusty patches near the plughole.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Brotton (TS12)
- Region
- Redcar and Cleveland
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a morning or an afternoon. We clean up when we’re done and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the day after.
Preparing for the visit
- Let us know about parking or access
- Open a window if you can
- Keep a parking space free if you can
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Related advice
Your questions about bath repair in Brotton
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Do you cover Brotton?
Yes, we do. Technicians travel to Brotton from across the region, with no extra charge for travel.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Do you need bath repair in Brotton?
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
The most common problems we are called about are:
- Snagging damage from a refit
- Rusty patches near the plughole
- Scuffs and scratches in the surface
- A failed DIY repair that is discoloured or lifting
What your quote should include
- A fixed price, and whether VAT is included
- Whether they match the colour on site
- How long the guarantee is and what it covers
- What happens if they find more damage
What a repair can’t fix
In fairness, some problems need a different fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we will say what we think.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Keeping it looking good
Once the work has cured, treat it gently:
- Check that an acrylic bath doesn’t move when you stand in it
- Rinse the bath after use, especially in hard water areas
- Don’t leave razors or cans standing in the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
What affects the price in Brotton
Repairs from £95. We give every job a fixed price from photos. This is what makes a difference:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Access to the area
- What the surface is made of
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Two or three clear photos are typically enough. It helps if you send:
- Any details about the material
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
What else we do in Brotton
Brotton and the surrounding area
Brotton is about 5 miles north-east of Guisborough, in Redcar and Cleveland. Anywhere in TS12, we carry out the work at your property. We work in 48 places across Redcar and Cleveland. You can also see our page for Newcastle upon Tyne, about 40 miles away.
Our visits in TS12 are booked in the same way as anywhere else. Local streets include High Street, Dixon Street and Hutchinson Street. We also travel to North Skelton (1 mile south-west), Kilton (1 mile south-east), Carlin How (1 mile east), Kilton Thorpe (1 mile south) and Skinningrove (1 mile east). We also work in nearby towns such as Redcar (6 miles north-west), Guisborough (5 miles south-west), Eston (9 miles west), Marske-by-the-Sea (4 miles north-west), Grangetown (8 miles west) and South Bank (9 miles west). Brotton is among the bigger towns we cover in Redcar and Cleveland.
Near you in Brotton
Locally, our jobs take us to homes close to Badger Hill Academy, Freebrough Academy and Church of St Margaret of Antioch. The nearest railway station is Saltburn station, roughly 1.8 miles north-west. A little further out are Redcar Primary Care Hospital (5.7 miles north-west) and Kilton Castle (1.6 miles south-east). Green spaces nearby include Freebrough Hill.
About our accreditations · Every repair comes with a one-year guarantee.
