Warwickshire · England
Bath Repair in New Bilton
Bath repair in and around New Bilton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- A hole punched through by something heavy
Our work in New Bilton
New Bilton is about 1 mile west of Rugby, in Warwickshire. Anywhere in CV22, we come to you. New Bilton is one of 324 towns and villages in Warwickshire we cover. You can also see our page for Birmingham, about 27 miles away.
Postcode districts we cover here: CV22 and CV21. From May Lane, David Road and Evans Road or anywhere nearby, we can come to you. Neighbouring places we cover include Bilton (1 mile south-west), Rugby (1 mile east), Newbold-on-Avon (2 miles north), Dunchurch (2 miles south) and Brownsover (2 miles north-east). We also work in nearby towns such as Nuneaton (13 miles north-west), Warwick (14 miles south-west), Royal Leamington Spa (12 miles south-west), Bedworth (11 miles north-west), Leamington Spa (12 miles south-west) and Kenilworth (12 miles west).
Landmarks near New Bilton
Typical jobs here are in homes near The Crescent School, Church of St Mark and St Oswald's CofE Academy, among other places. Other local landmarks include Harris School (0.6 miles south-east) and The Rugby Hotel (0.9 miles east). The closest station to New Bilton is Rugby station, about 1.6 miles north-east. Other landmarks nearby include Webb Ellis Rugby Football Museum (0.8 miles east) and Hospital of St. Cross (1 mile east). Green spaces nearby include Newbold Quarry Park and Hensborough Hill.
Bath repair at your home in New Bilton
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Common call-outs are for scuffs and scratches in the surface and hairline or through cracks in acrylic, in whirlpool & spa baths, cast iron enamel and roll-top & freestanding.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- New Bilton (CV22, CV21)
- Region
- Warwickshire
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from New Bilton
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
What we are called out for in New Bilton
A cracked acrylic bath normally wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move.
Look out for any of the following:
- Cracks in an acrylic bath
- Holes from dropped items
- Scuffs and scratches in the surface
- Chips on the rim or sides
Before you book anyone
- The length of the guarantee and what it covers
- How long it needs to cure
- How to care for the finish
- What protection goes down before work starts
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in New Bilton, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
When a repair is not the answer
Before booking, it’s worth knowing the limits too:
- Flexing caused by a failed cradle or loose feet
- Rust that has eaten right through a steel bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
What we do, step by step
Arrival times are agreed in advance, so you are not left guessing. On site, it takes a few hours. We leave the room clean and ready to use once it has cured.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
- Open a window if you can
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Towns and villages near New Bilton
Also in New Bilton
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Prices and what affects them
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- The material and finish
- How much damage there is
The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
Send photos for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- What it’s made of, if you know
If you’re in New Bilton and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Stick to mild cleaners and a soft cloth
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
- Do not leave razors or cans standing in the bath
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
