Warwickshire · England
Bath chip & crack repair in Bilton, Warwickshire
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Bilton. Send pictures for a free, fixed quote.
- Repairs from £95
- Chips caused by builders
- Cracks in an acrylic bath
Do you need bath repair in Bilton?
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
The most common problems we are called about are:
- Snagging damage from a refit
- Rusty patches near the plughole
- A failed DIY repair that’s discoloured or lifting
- Cracks in an acrylic bath
What to look for in a quote
- Aftercare advice
- What prep work is covered
- How the colour is matched
- Is the price fixed, and does it include VAT?
Bath repair at your home in Bilton
Most of our bath repairs take a few hours, and you can normally bathe again the next day. You won’t need a plumber or tiler, because nothing is disconnected. We work on acrylic, cast iron enamel and whirlpool & spa baths, and people most frequently call us about chips under the taps and rusty patches near the plughole.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Bilton (CV22, CV23, CV21)
- Area hub
- Warwickshire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair can’t fix
Some jobs are not right for a repair, including:
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Common questions in Bilton
It’s been repaired before. Can you still fix it?
Generally, yes. We remove the old repair before doing a new one, so mention it when you send photos.
How much does bath repair cost in Bilton?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a holed acrylic bath repairable?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Our work in Bilton
Bilton is about 1 mile west of Rugby, in Warwickshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We cover 324 places in Warwickshire. You can also see our page for Birmingham, about 26 miles away.
Jobs in CV22, CV23 and CV21 work the same way as everywhere else we cover. Local streets include May Lane, David Road and Evans Road, and we cover them all. Neighbouring places we cover include New Bilton (1 mile north-east), Rugby (1 mile east), Dunchurch (2 miles south), Newbold-on-Avon (2 miles north) and Toft (2 miles south). Within a short drive, we also cover Nuneaton (13 miles north-west), Warwick (13 miles south-west), Royal Leamington Spa (11 miles south-west), Bedworth (11 miles north-west), Leamington Spa (12 miles south-west) and Kenilworth (12 miles west).
What’s near Bilton
Typical jobs here are in homes near Bilton School, Henry Hinde Infant School and The Crescent School, among other places. Bilton’s nearest station is Rugby station, roughly 1.9 miles north-east. Other landmarks nearby include Webb Ellis Rugby Football Museum (1.1 miles north-east) and Clock Towers Shopping Centre (1.3 miles north-east). Open spaces near Bilton include Hensborough Hill and Newbold Quarry Park.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Put a towel in the bath if you are working above it
- Clean with warm water and a mild detergent
- Store metal items away from the bath
- Ensure an acrylic bath is firm underfoot
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- Unusual colours or finishes
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- How much damage there is
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- Details of any past repairs
- The material, if you know it
- Something in shot to show the size
- A clear, close picture of the problem area
Upload pictures of the damage and one of the entire item, and tell us you are in Bilton, and we’ll come back with a fixed quote.
Towns and villages near Bilton
What else we do in Bilton
Landlords, agents and businesses in Bilton
For anyone letting property in or around Bilton, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Repair or replace in Bilton?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- Colour-matched on site
- Rooms protected and left tidy
- One visit for most repairs
- Work done at your home or business
Take a look at our prices page or guide to resurfacing and replacement costs.
How the visit works
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and we start. Allow a few hours, depending on the damage, and we will keep you posted as we go.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
Get a quote
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
