Lancashire · England

Bath Repair for Brunshaw homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Brunshaw and across Lancashire. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Brunshaw

How we handle bath repair in Brunshaw

We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. Common call-outs are for scuffs and scratches in the surface and hairline or through cracks in acrylic, in cast iron enamel, roll-top & freestanding and whirlpool & spa baths.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Where
Brunshaw (BB10, BB11)
Region
Lancashire
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026

Questions from Brunshaw

How quickly can you book me in?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

It’s been repaired before. Can you still fix it?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Is a bath repair durable?

A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.

What information do you need?

Just pictures, your postcode and a contact number. On the day, access to the room.

Can you match an avocado or pink bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Flexing caused by a failed cradle or loose feet
  • A bath worn all over, where resurfacing makes more sense
  • Water coming from the waste or taps rather than the bath

Not sure? Send photos and we will give you a straight answer before booking.

Materials we repair

  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel

Signs you need bath repair in Brunshaw

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

These are the problems we are asked about most:

  • A chip where the taps sit
  • A kit repair that didn’t last
  • Rust by the waste and overflow
  • Hairline or through cracks in acrylic

Comparing quotes

  • Whether they match the colour on site
  • Whether the price is fixed and includes VAT
  • How the room is protected while they work
  • Whether a trained technician does the job

Our hiring checklist

How we price bath repair

Prices start from £95. You will know the full cost before you book. We take into account:

  • How many areas need work
  • Any earlier repairs that need removing first
  • Doing more than one item at once
  • Unusual colours or finishes

We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Send pictures for a quote

The better the photos, the more accurate the price. Here’s what helps:

  • One sharp close-up of the damage
  • Daylight if possible, and no flash reflection
  • A picture taken from further back
  • Whether it’s been repaired or coated before

If you are in Brunshaw and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Keeping it looking good

Once the work has cured, treat it gently:

  • Don’t leave a fresh chip for long
  • Keep abrasive pads and gritty cleaners away from the bath
  • Get a dripping tap fixed promptly
  • If an acrylic bath flexes, have its feet adjusted

Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

How it works

We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a morning or an afternoon for most jobs. The room is left tidy and you’ll know when it can be used.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can normally use the bath the day after.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Tell us if there are stairs or a lift
  • Mention any parking restrictions or tricky access

Get a quote

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.

Get a fixed quote

Read more

Brunshaw and nearby

Brunshaw is about 1 mile east of Burnley, in Lancashire. From the centre of Brunshaw to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 482 towns and villages across Lancashire. Our jobs stretch from Brunshaw to Manchester (about 22 miles away).

We work across the BB10 and BB11 postcode area and the streets around it. That includes homes on Ridge Avenue, Mayfair Road and Brunshaw Road and the roads around them. If you’re just outside Brunshaw, we cover Burnley Wood (1 mile south-west), Burnley (1 mile west), Stoneyholme (1 mile north-west), Rose Grove (3 miles west) and Habergham (3 miles west). Larger places within reach include Accrington (6 miles south-west), Nelson (3 miles north), Rawtenstall (7 miles south-west), Colne (5 miles north), Clitheroe (9 miles north-west) and Haslingden (8 miles south-west).

Near you in Brunshaw

Typical jobs here are in homes near Visions Learning Trust, Unity College and Burnley Brunshaw Primary School and the streets around them. Other local landmarks include Queens Park (0.7 miles north-west), Church of St Stephen (0.7 miles south-west) and Park View pub (0.5 miles west). The closest station to Brunshaw is Burnley Central station, about 1.2 miles west. Well-known places in the area include Burnley General Hospital (1.4 miles north) and Museum of Local Crafts And Industries (1 mile south). Open spaces near Brunshaw include Rowley Lake and Towneley Castle Hill.

Map of Brunshaw © OpenStreetMap contributors

Repairs by material

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Repair or replace in Brunshaw?

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Brunshaw. The job itself decides the price: how much damage, what it’s made of and how many items.

Why Brunshaw customers choose us

  • A year’s guarantee on all work
  • A fixed quote before you book
  • Everything repaired in place
  • Same prices wherever you are

Read our pricing or bath cost comparison.

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs in Lancashire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.