Somerset · England
Bath Repair for Westcombe homes
Bath repair in and around Westcombe: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Holes from dropped items
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Westcombe. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Everything repaired in place
- Repair technicians who travel to you, UK-wide
- Most jobs done in one visit
- CHAS and Constructionline accredited
Take a look at our full price list and bath cost comparison.
Bath repair in Westcombe, done in place
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Typical jobs include a chipped rim or side and chips caused by builders, across cast iron enamel, roll-top & freestanding and pressed steel enamel.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Area
- Westcombe (BA4)
- County
- Somerset
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Work for landlords and builders
For anyone letting property in or around Westcombe, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
When a repair is not the answer
To be straight with you, there are a few things a repair won’t fix:
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Westcombe
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Questions from Westcombe
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
When can I have a bath again?
Typically the next day. We confirm the time before we leave.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Do you work in Westcombe?
Yes. We work across the UK and come to Westcombe and the rest of Somerset. Send pictures and we’ll quote, or call 0345 017 0787.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
What bath repair costs
Prices start from £95. You won’t pay by the hour. The price is based on:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- The colour and finish to match
Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed price
Two or three clear photos are normally enough. Try to include:
- Something in shot to show the size
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Also near Westcombe
Also in Westcombe
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow two to three hours for most chips from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the following day.
Getting ready for the visit
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
Ask for a price
If you are in Westcombe and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Westcombe and nearby
Westcombe is about 8 miles south-west of Frome, in Somerset. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. We cover all 640 towns and villages across Somerset, from the larger towns to small villages.
Here we cover the BA4 postcode area. Streets in the area include Bailey's Lane, Westcombe Hill and Westcombe Road, all of which we cover. If you’re just outside Westcombe, we cover Batcombe (1 mile east), Stoney Stratton (1 mile west), Chesterblade (2 miles north-west), Upton Noble (2 miles east) and Lamyatt (2 miles south-west). Further out, we also cover Frome (8 miles north-east), Wells (9 miles north-west), Midsomer Norton (9 miles north), Shepton Mallet (4 miles north-west), Street (12 miles west) and Glastonbury (11 miles west).
What’s near Westcombe
Around Westcombe, we work in homes near The Three Horseshoes pub and Church of St Mary the Virgin, among other places. The nearest railway station is Bruton station, about 2.8 miles south of the centre. The countryside around Westcombe includes Lamyatt Beacon.
Common problems we fix in Westcombe
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
It’s worth getting a quote if you see:
- Chips under the taps
- Holes from dropped items
- Chips on the rim or sides
- Hairline or through cracks in acrylic
Before you book anyone
- What protection goes down before work starts
- What preparation is included
- If travel is included in the price
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
