Flintshire · England
Bath Repair for Brynffordd homes
Our repair technicians come to Brynffordd for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- Impact holes in acrylic
Bath repair in Brynffordd, done in place
A typical bath repair is a few hours’ work, and you can normally bathe again the following day. You will not need a plumber or tiler, because the bath does not move. Whether it’s a failed DIY repair that’s discoloured or lifting and impact holes in acrylic, we can help, on roll-top & freestanding, cast iron enamel and pressed steel enamel alike.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Where
- Brynffordd (CH8)
- Area hub
- Flintshire
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £95. You will know the full cost before booking. We look at:
- How many areas need work
- How many items we do on one visit
- The material and finish
- Previous DIY repairs that have to come out
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
Good photos mean an accurate price. Here’s what helps:
- Whether it’s been repaired or coated before
- Any details about the material
- A close-up of the damage, in focus
- Something in shot to show the size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
More services for Brynffordd
Common questions in Brynffordd
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Do you cover Brynffordd?
Yes, we do. Repair technicians travel to Brynffordd from across the region, and the price is the same as everywhere else.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Repairing versus replacing in Brynffordd
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why book with us
- Work done at your home or business
- Rooms protected and left tidy
- Every repair guaranteed for a year
- One visit for most repairs
See our pricing or bath cost comparison.
Landlords, agents and businesses in Brynffordd
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For anyone letting property in or around Brynffordd, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Brynffordd and nearby
Brynffordd (also: Brynford) is about 4 miles west of Flint, in Flintshire. From the centre of Brynffordd to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Brynffordd is one of 139 towns and villages in Flintshire where we work. Our jobs stretch from Brynffordd to Liverpool (about 16 miles away).
We cover every part of the CH8 postcode area and the streets around it. Close by, we cover Calcoed (1 mile north-west), Milwr (1 mile east), Holywell (1 mile north), Carmel (1 mile north) and Holway (1 mile north). Within a short drive, we also cover Connah's Quay (7 miles south-east), Buckley (9 miles south-east), Bwcle (9 miles south-east), Flint (4 miles east), Saltney (14 miles south-east) and Mold (7 miles south-east).
What’s near Brynffordd
Our customers here include homes close to Brynford C.P. School, Llyn y Mawn pub and St Michael's Church, among other places. The closest station to Brynffordd is Flint station, about 4.2 miles east of the centre. Nearby you’ll also find St Winefride's Well Museum (1.4 miles north) and Holywell Castle Mound (1.4 miles north). Not far away are Llyn Helyg and Pen y Ball Top.
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Fix dripping taps early to stop staining and limescale
- Clean with warm water and a mild detergent
- Do not scrub with anything abrasive
- Protect the bath with a towel when doing jobs nearby
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
Send us photos and we will tell you honestly.
Materials we work on in Brynffordd
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Common problems we fix in Brynffordd
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Contact us if you’ve noticed:
- A kit repair that didn’t last
- Chips along the edge of the bath
- Holes from dropped items
- Snagging damage from a refit
Comparing quotes
- How long the guarantee is and what it covers
- How changes to the job are handled
- Whether the price covers travel
- Whether the colour is mixed to match
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which usually takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Clear the area around the damage
- Make sure the room can be ventilated
- Mention any earlier repairs or resurfacing
Ask for a price
If you are in Brynffordd and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
