Leicestershire · England
Bath Repair in Bufton
Bath repair in and around Bufton: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Impact holes in acrylic
FAQs for Bufton
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we’ll plan for it.
How long before I can use the bath?
Usually within a day, depending on the repair.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
What happens once I’ve sent photos?
We come back with a fixed price, plus dates. You are under no obligation.
How we handle bath repair in Bufton
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour matched so it blends in. Typical jobs include damage done while the bathroom was being fitted and a kit repair that didn’t last, in whirlpool & spa baths, acrylic and roll-top & freestanding.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Bufton (CV13)
- County
- Leicestershire
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a morning or an afternoon, tidy-up included.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Open a window if you can
- Avoid using the area for a few hours before we arrive
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we look at:
- Where the damage is and how we get to it
- How hard the colour is to match
- What kind of damage it is
- What the surface is made of
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Send pictures for a quote
You can typically get a fixed quote without us visiting. To make it quick:
- Details of any past repairs
- One picture of the whole bath
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Leicestershire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Towns and villages near Bufton
More services for Bufton
Why repair rather than replace?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
Why book with us
- Every repair guaranteed for a year
- Same prices wherever you are
- One visit for most repairs
- Everything repaired in place
See our full price list and guide to resurfacing and replacement costs.
Covering Bufton
Bufton is about 5 miles south of Coalville, in Leicestershire. We travel to homes and businesses in Bufton, so there is no workshop to go to. Our repair technicians cover all 287 towns and villages across Leicestershire, from the larger towns to small villages. We work right across the region, from Bufton to Birmingham (about 24 miles away).
Postcode districts we cover here: CV13. Streets in the area include Main Street, Odstone Road and Nailstone Road, and we cover them all. Close by, we cover Barton in the Beans (1 mile north), Carlton (1 mile south), Odstone (2 miles north), Shackerstone (2 miles west) and Market Bosworth (2 miles south). Within a short drive, we also cover Loughborough (12 miles north-east), Hinckley (8 miles south), Wigston (13 miles east), Coalville (5 miles north), Ashby-de-la-Zouch (7 miles north) and Shepshed (10 miles north-east).
Landmarks near Bufton
Locally, our jobs take us to homes close to The Market Bosworth School and Church of St Andrew and the streets around them. Well-known places in the area include Shackerstone railway station (1.4 miles west). Not far away are Ambion Hill.
What we’re called out for in Bufton
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
You may need us if you’ve spotted:
- Chips on the rim or sides
- A cracked acrylic bath
- A kit repair that didn’t last
- A hole punched through by something heavy
Questions to ask before booking
- What protection goes down before work starts
- Whether a trained technician does the job
- What happens if the damage is worse than the photos show
- What prep work is covered
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- Water coming from the waste or taps rather than the bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Bufton
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
