Moray · Scotland
Bath Repair for Burghead homes
Bath repair in Burghead without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Rust by the waste and overflow
What a repair can’t fix
Some jobs aren’t right for a repair, including:
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Bath repair at your home in Burghead
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. If you’re dealing with a kit repair that didn’t last and cracks in an acrylic bath, we can generally put it right.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Burghead (IV30)
- Area hub
- Moray
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow two to three hours for most chips. Before we go, we will explain when it can be used and how to look after it.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the day after, the bath is ready to use.
How to prepare
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
- Keep a parking space free if you can
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before you book. We take into account:
- The type of damage
- How much damage there is
- What the surface is made of
- Where the damage is and how we get to it
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
Good photos mean an accurate price. Here’s what we find most useful:
- The material, if you know it
- Your postcode, so we can check dates
- Something in shot to show the size
- One sharp close-up of the damage
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Towns and villages near Burghead
Other services in Burghead
Landlord and trade work in Burghead
Landlords, letting agents and housing providers in Burghead use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Rinse it down after each bath
- Get a dripping tap fixed promptly
- Have new chips seen to early
- Avoid scourers, wire wool and gritty cream cleaners
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Nothing taken out or refitted
- One price list for the entire UK
- CHAS and Constructionline accredited
- Fixed prices from your pictures
Take a look at our prices page and guide to resurfacing and replacement costs.
Your questions about bath repair in Burghead
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
How do I get a price for bath repair in Burghead?
Repairs from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
When to call us in Burghead
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
People typically call us when they notice one of these:
- Rust by the waste and overflow
- Scuffs and scratches in the surface
- Chips under the taps
- Hairline or through cracks in acrylic
What to look for in a quote
- Whether a trained technician does the job
- Aftercare advice
- Whether there are any call-out or travel charges
- How the room is protected while they work
Burghead and nearby
Burghead is about 7 miles north-west of Elgin, in Moray. We travel to homes and businesses in Burghead, so there’s no workshop to go to. Burghead is one of 58 towns and villages in Moray where we work.
We cover every part of IV30 and the streets around it. From Station Road, Kinloss Street and Mcdonald Crescent or a nearby road, a technician can come to you. Main roads around Burghead include the B9013 and B9040, which makes travel easy. Close by, we cover Cummingston (1 mile east), Backlands (2 miles east), Hopeman (2 miles east), College of Roseisle (2 miles south-east) and Duffus (3 miles east). Larger places within reach include Elgin (7 miles south-east), Forres (8 miles south-west), Lossiemouth (7 miles east), Ashgrove (8 miles south-east), Lhanbryde (11 miles south-east) and Kinloss (5 miles south-west). Burghead is among the bigger towns we cover in Moray. Remote and island addresses take a little more planning, so it’s best to call first.
Near you in Burghead
Typical jobs here are in homes near Burghead and the streets around them. Nearby you will also find Inverugie Castle (2.3 miles east).
About our accreditations · Every repair comes with a one-year guarantee.
