Moray · Scotland

Non-Slip Bath Coating in Burghead

Non-slip bath coating in Burghead without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Burghead

Common problems we fix in Burghead

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

The most common problems we are called about are:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people

What your quote should include

  • If travel is included in the price
  • How changes to the job are handled
  • A fixed quote, and whether VAT is included
  • How to care for the finish

10 questions to ask before booking

Non-slip bath coating at your home in Burghead

It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. Common call-outs are for worn-out textured areas and resurfaced baths that are now too smooth, on wet room floors (ask us), shower trays and enamelled baths.

A one-year guarantee comes as standard. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Where
Burghead (IV30)
County
Moray
Cover
One year on every repair
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

FAQs for Burghead

Can you repair several things at once?

Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.

Is there a call-out fee?

We don’t add a call-out fee. Your fixed quote includes everything.

Do you do work for letting agents?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

What do you need from me?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

Do the materials smell?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before booking.

Materials we repair

  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays

Landlords, agents and businesses in Burghead

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We are used to working with agents and managing companies. Just send pictures, the address and how to get access.

Where we work around Burghead

Burghead is about 7 miles north-west of Elgin, in Moray. From the centre of Burghead to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in 58 places across Moray.

We cover every part of the IV30 postcode area and the streets around it. Jobs here include addresses on Station Road, Kinloss Street and Mcdonald Crescent and the roads around them. With the B9013 and B9040 close by, Burghead is easy for our technicians to reach. We also travel to Cummingston (1 mile east), Backlands (2 miles east), Hopeman (2 miles east), College of Roseisle (2 miles south-east) and Duffus (3 miles east). Further out, we also cover Elgin (7 miles south-east), Forres (8 miles south-west), Lossiemouth (7 miles east), Ashgrove (8 miles south-east), Lhanbryde (11 miles south-east) and Kinloss (5 miles south-west). Burghead is among the bigger towns we cover in Moray. If you are somewhere remote, ring us first and we’ll plan the trip.

Around Burghead

Around Burghead, we work in homes near Burghead. Other landmarks nearby include Inverugie Castle (2.3 miles east).

Map of Burghead © OpenStreetMap contributors

Can I fix it myself?

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

Should you replace it?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why book with us

  • Same prices wherever you are
  • CHAS, Constructionline and SafeContractor accredited
  • Technicians who travel to you, UK-wide
  • Rooms protected and left tidy

See our full price list.

What we do, step by step

Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. Allow a few hours.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, normally overnight.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Let us know which floor the room is on
  • Let the surface dry out before the visit

Ask for a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you’re under no obligation.

Send pictures for a quote

Advice

What affects the price in Burghead

There is no area surcharge for Burghead. The price reflects:

  • The material
  • How easy the damage is to reach
  • How hard the colour is to match
  • Whether it’s a chip, crack, burn or wear

Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

How to get a fixed quote

Phone pictures are fine. Just ensure we can see:

  • A close-up of the damage, in focus
  • What it’s made of, if you know
  • Natural light rather than flash
  • A coin beside the damage so we can judge size

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.