Wrexham · Wales
Bath Repair for Bwlchgwyn homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Bwlchgwyn and across Wrexham. Send pictures for a free, fixed quote.
- Repairs from £95
- A cracked acrylic bath
- Impact holes in acrylic
About our bath repair in Bwlchgwyn
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair cast iron enamel, whirlpool & spa baths and pressed steel enamel, and people most often call us about rusty patches near the plughole and chips caused by builders.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Bwlchgwyn (LL11)
- Region
- Wrexham
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Bwlchgwyn
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- The material and finish
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
Phone pictures are fine, there’s no need for anything special. Make sure they show:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- The material, if you know it
- A coin or ruler next to the damage for scale
If you’re in Bwlchgwyn and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Also near Bwlchgwyn
What else we do in Bwlchgwyn
When to call us in Bwlchgwyn
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Get in touch if you’ve noticed:
- Holes from dropped items
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
- Chips on the rim or sides
Before you book anyone
- What aftercare is recommended
- How long it needs to cure
- Who turns up on the day
- What prep work is covered
Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. Our prices are the same across the UK, with no extra for Bwlchgwyn. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Dust sheets down, tidy finish
- Everything repaired in place
- A fixed quote before you book
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page or bath cost comparison.
How to care for the repair
A little care keeps the finish looking good. Our advice:
- Do not leave a fresh chip for long
- Do not scrub with anything abrasive
- Protect the bath with a towel when doing jobs nearby
- Stick to mild cleaners and a soft cloth
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
FAQs for Bwlchgwyn
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you quote from photos?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
What happens after I send pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Can you repair a hole in a bath?
Generally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
What we cannot put right
It helps to know what we can’t do:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
What we do, step by step
We agree an arrival time beforehand. Once we’re there, the work takes a few hours, depending on the damage in most cases. We leave the room clean and you’ll know when it can be used.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Read more
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About Bwlchgwyn
Bwlchgwyn is about 5 miles west of Wrexham, in Wrexham. Across the LL11 area, we come to you. We work in 115 places in Wrexham, from the larger towns to small villages. You can also see our page for Liverpool, about 24 miles away.
Jobs in LL11 work the same way as everywhere else we cover. Local streets include Stryt Maelor, Fronheulog Hill and Wesley Road, all of which we cover. Close by, we cover Gwynfryn (1 mile south-west), Pentre Saeson (1 mile east), Gegin (1 mile south-east), Maes Maelor (1 mile west) and Minera (1 mile south-east). Further out, we also cover Wrexham (5 miles east), Caia Park (6 miles east), Offa (5 miles south-east), Rhosllannerchrugog (5 miles south-east), Rhosddu (5 miles east) and Acton (5 miles east).
Near you in Bwlchgwyn
Locally, our jobs take us to homes close to Bwlchgwyn C.P. School, Christ Church and Milestone Motor Inn and the streets around them. Bwlchgwyn’s nearest station is Cefn-Y-Bedd station, roughly 3.4 miles north-east. Nearby you’ll also find Wrexham Maelor Hospital (4.2 miles south-east) and Geological Museum of North Wales (within half a mile west). For a walk, there is Plas-gwyn Mountain and Brymbo Pool.
About our accreditations · Every repair comes with a one-year guarantee.
