Wrexham · Wales
Bath Repair for Minera homes
Local bath repair for Minera: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A hole punched through by something heavy
- A cracked acrylic bath
Bath repair in Minera, done in place
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and the jobs we see most are chips on the rim or sides and a failed DIY repair that’s discoloured or lifting.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Minera (LL11)
- County
- Wrexham
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Minera
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- The material and finish
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
Our prices are the same across the UK, with no extra for Minera. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
Two or three clear photos are normally enough. It helps if you send:
- A close-up of the damage, in focus
- A wider photo showing the entire bath
- Where you are, by postcode
- A coin beside the damage so we can judge size
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Minera and nearby
Minera is about 4 miles west of Wrexham, in Wrexham. Whether you’re in the middle of Minera or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Minera is one of 115 places in Wrexham where we work. Our jobs stretch from Minera to Liverpool (25 miles away).
Postcode districts we cover here: LL11. You’ll find streets such as Church Road, Eversley Court and Penypalmant Road. Nearby, we also work in Gegin (1 mile north-east), New Brighton (1 mile south), Pentre Saeson (1 mile north), Coedpoeth (1 mile south-east) and Fron (1 mile east). Larger places within reach include Wrexham (4 miles east), Caia Park (5 miles east), Offa (4 miles east), Rhosllannerchrugog (4 miles south-east), Rhosddu (4 miles east) and Acton (5 miles east).
What’s near Minera
We visit homes around Nant Mill, Minera Aided Primary School and Church of St Mary and the streets around them. For rail, the closest station is Gwersyllt station, about 3.1 miles east of the centre. Well-known places in the area include Geological Museum of North Wales (1 mile north-west) and Wrexham Maelor Hospital (3.4 miles east). For a walk, there is Pen-rhos and Brymbo Pool.
Questions from Minera
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Do you cover the whole of Wrexham?
Across the UK. Our prices are the same everywhere.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Do you come to Minera?
We do. We send a technician to Minera for every job, and the price is the same as everywhere else.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Wrexham and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
What we cannot put right
We’ll always be straight with you, so here’s what a repair won’t do:
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
- A steel bath rusted through
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Minera
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Do you need bath repair in Minera?
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Get in touch if you’ve noticed any of these:
- Scuffs and scratches in the surface
- A cracked acrylic bath
- Rusty patches near the plughole
- Snagging damage from a refit
What to look for in a quote
- How the colour is matched
- Aftercare advice
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
Nearby places to Minera
What else we do in Minera
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Put a towel in the bath if you are working above it
- Use a soft cloth and washing-up liquid for everyday cleaning
- If an acrylic bath flexes, have its feet adjusted
- Keep abrasive pads and gritty cleaners away from the bath
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
The process
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It generally takes a few hours, depending on the damage, and you can get on with other things while we are there.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know about parking or access
- Let us know if it has been repaired before
- Keep a parking space free if you can
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
