Aberdeenshire · Scotland

Bath Repair in Cairnie

We travel to Cairnie for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Impact holes in acrylic
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Cairnie homes

Bath repair in Cairnie, done in place

We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. Most baths can be used again the day after. Our technicians work on roll-top & freestanding, whirlpool & spa baths and acrylic, and common reasons people get in touch are impact holes in acrylic and rust spots around the plughole.

The work is covered for a year after we finish. If anything is not right, ring us and we will come back.

Before and after: a damaged acrylic bath corner repaired in place
Where
Cairnie (AB54)
Region
Aberdeenshire
Guarantee
12 months on all our work
Quote
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026

Repair or replace in Cairnie?

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why us?

  • Nothing taken out or refitted
  • We will tell you if it’s not worth repairing
  • One-year guarantee on every repair
  • Colour-matched on site

Read our pricing or resurfacing vs replacement cost guide.

What we are called out for in Cairnie

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.

Keep an eye out for these signs:

  • A chipped rim or side
  • Deep scratches in acrylic
  • Damage beneath the taps
  • A hole punched through by something heavy

Comparing quotes

  • The length of the guarantee and what it covers
  • What aftercare is recommended
  • Is the price fixed, and does it include VAT?
  • Whether cleaning and preparation are in the price

Choosing a repair company

How the visit works

We turn up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can normally use the bath the day after.

How to prepare

  • Keep pets and children out of the room while we work
  • Tell us if there are stairs or a lift
  • Clear the area around the damage

Get a quote

The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.

Get a free quote

Advice

Different materials, different repairs

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Covering Cairnie

Cairnie is about 13 miles south of Buckie, in Aberdeenshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 161 places across Aberdeenshire.

All of AB54 is within our area, from the main roads to the quietest streets. Other places close to Cairnie include Ruthven (2 miles north-east), Huntly (4 miles south-east), Milltown of Rothiemay (4 miles north-east), Keith (5 miles north-west) and Newmill (6 miles north-west). Larger places within reach include Turriff (15 miles east), Portsoy (15 miles north-east), Insch (14 miles south-east) and Aberchirder (10 miles north-east). Some remote addresses need extra planning, so call us to arrange it.

What’s near Cairnie

We visit homes around Cairnie Parish Church, among other places. The nearest railway station is Huntly station, about 4.3 miles south-east of the centre. Well-known places in the area include Jubilee Hospital (4 miles south-east) and Auchanachie Castle (1.6 miles north-east). For a walk, there is The Bin.

Map of Cairnie © OpenStreetMap contributors

When we’d advise against a repair

Before booking, it’s worth knowing the limits too:

  • Leaking fittings, which need a plumber
  • A bath worn all over, where resurfacing makes more sense
  • A steel bath rusted through

If in doubt, send photos and we will say what we think.

Materials we repair

  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel

Landlord and trade work in Cairnie

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.

Cairnie questions

How do I book?

Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before.

How invisible is a bath repair?

On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

What about rust by the waste?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Do you repair coloured baths?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

How long does the repair take to cure?

Usually the day after. We will tell you the exact curing time when we finish.

Can you repair a crack in an acrylic bath?

Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.

How we price bath repair

Repairs from £95. There’s no charge for travel to Cairnie. The price comes down to:

  • How many areas need work
  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear
  • What the surface is made of

Our prices are the same across the UK, so there’s no premium for Cairnie. What changes the price is the job itself: the material, the amount of damage and how many items.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what to send:

  • Natural light rather than flash
  • A clear, close picture of the problem area
  • The material, if you know it
  • A coin or ruler next to the damage for scale

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed quote, not an estimate.

Keeping it looking good

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Clean with warm water and a mild detergent
  • Cover the bath during DIY or decorating
  • Store metal items away from the bath
  • Get a dripping tap fixed promptly

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.