Aberdeenshire · Scotland
Bath chip & crack repair in Bridgend, Aberdeenshire
We travel to Bridgend for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A chipped rim or side
About our bath repair in Bridgend
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. We work on whirlpool & spa baths, roll-top & freestanding and acrylic, and the jobs we see most are rust spots around the plughole and chips caused by builders.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Bridgend (AB54)
- County
- Aberdeenshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Simple care helps the repair last. We recommend:
- Have new chips seen to early
- Rinse it down after each bath
- A dripping tap stains enamel, so fix it early
- Keep metal cans and razors off the surface
A repaired bath needs no special treatment. Skip bleach and gritty creams and give it a rinse after each bath.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Also in Bridgend
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why us?
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- Straight answers about what a repair can do
- Generally one visit, start to finish
See our pricing or guide to resurfacing and replacement costs.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Honest limits
A few problems are outside what a surface repair can do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, photos and access details.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Bridgend questions
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send photos.
What affects the price in Bridgend
Repairs from £95. There’s no area surcharge for Bridgend. What changes the price is:
- How much damage there is
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
We charge the same wherever you are, so there’s no premium for Bridgend. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
Before you send photos, these tips help us give you a firm price:
- The material, if you know it
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- Details of any past repairs
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Our work in Bridgend
Bridgend is about 18 miles north-west of Inverurie, in Aberdeenshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover 161 places across Aberdeenshire, from the larger towns to small villages.
All of AB54 is within our area. Close by, we cover Backburn (1 mile south-east), Gartly (2 miles south), Huntly (3 miles north), Kennethmont (5 miles south-east) and Rhynie (5 miles south). Further out, we also cover Turriff (15 miles north-east), Alford (13 miles south), Insch (8 miles south-east) and Aberchirder (12 miles north-east). For island and remote addresses, call first so we can plan the visit.
Around Bridgend
Around Bridgend, we work in homes near St Andrew's Parish Church and the streets around them. The closest station to Bridgend is Huntly station, about 2.6 miles north. Well-known places in the area include Brander Museum (2.7 miles north) and Jubilee Hospital (2.4 miles north). Green spaces nearby include Kye Hill.
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a few hours, depending on the damage in most cases. The room is left tidy and you’ll know when it can be used.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
Getting a price
Most clients in Bridgend get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
