Angus · Scotland
Bath Repair in Carlogie
Fixed-price bath repair in Carlogie and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Chips under the taps
- A failed DIY repair that is discoloured or lifting
About our bath repair in Carlogie
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. We regularly repair cast iron enamel, whirlpool & spa baths and roll-top & freestanding, and people most frequently call us about chips under the taps and hairline or through cracks in acrylic.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Carlogie (DD7)
- County
- Angus
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath repair in Carlogie?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
If you can see any of these, send us a picture:
- A chip where the taps sit
- Hairline or through cracks in acrylic
- An old repair that has yellowed or come loose
- Rust spots around the plughole
Questions to ask before booking
- How soon you can use it again
- What happens if they find more damage
- A fixed quote, and whether VAT is included
- How your room will be protected
Our work in Carlogie
Carlogie is about 1 mile north of Carnoustie, in Angus. Whether you are in the middle of Carlogie or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Carlogie is one of 40 places in Angus where we work. Our nearest city page is Edinburgh, about 44 miles away.
Postcode districts we cover here: DD7. Jobs here include addresses on Isla Avenue, Carlogie Farm Road and Prosen Bank. Neighbouring places we cover include Clayholes (1 mile south-west), Panbride (1 mile east), Carnoustie (1 mile south), Hunter's Town (1 mile south-west) and West Haven (1 mile south-east). Within a short drive, we also cover Arbroath (6 miles north-east), Forfar (11 miles north-west), Brechin (15 miles north), Letham (8 miles north) and Friockheim (9 miles north).
Around Carlogie
Typical jobs here are in homes near Holyrood Episcopal Church and Carnoustie High School, among other places. Carlogie’s nearest station is Carnoustie station, roughly 1 mile south-east of the centre. Other landmarks nearby include Panmure Castle (1.4 miles north-west) and Ashludie Hospital (4.3 miles south-west).
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
What bath repair costs
Prices start from £95. We charge the same across the UK, including Carlogie. The price reflects:
- The material
- Doing more than one item at once
- Access to the area
- How much damage there is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Quotes from your photos
Almost every job we do is priced from pictures. This is what we need:
- Something in shot to show the size
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- One picture of the whole bath
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to a few hours, depending on the damage.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the next day, the bath is ready to use.
Preparing for the visit
- Let the surface dry out before the visit
- Tell us about parking, stairs or access
- Open a window if you can
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Towns and villages near Carlogie
Also in Carlogie
Repairing versus replacing in Carlogie
Many people think a damaged bath means a new one. Normally it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why choose Surface Doctor in Carlogie
- Technicians who travel to you, UK-wide
- Most jobs done in one visit
- Honest advice, even when it means no job
- No extra charge for your area
See our full price list or resurfacing vs replacement cost guide.
Carlogie questions
Do you cover the entire of Angus?
We work UK-wide. Prices do not change with location.
How do I get a price for bath repair in Carlogie?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you repair a failed DIY repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Can you quote from pictures?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Is there any odour?
There may be a mild smell during the work.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Looking after it afterwards
Looking after the surface is easy:
- Stick to mild cleaners and a soft cloth
- If an acrylic bath flexes, have its feet adjusted
- Have new chips seen to early
- Store metal items away from the bath
There’s nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
