Staffordshire · England

Bath Repair in Cellarhead

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Cellarhead, with a one-year guarantee on every repair.

  • Repairs from £95
  • Deep scratches in acrylic
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Cellarhead

What your bath is made of matters

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Bath repair in Cellarhead, done in place

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include snagging damage from a refit and scuffs and scratches in the surface, on pressed steel enamel, cast iron enamel and whirlpool & spa baths.

Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Before and after: a chipped, rust-stained bath around the plughole
Location
Cellarhead (ST9)
Area hub
Staffordshire
Guarantee
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

What we’re called out for in Cellarhead

Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

Send us a photo if you notice any of these:

  • Chips along the edge of the bath
  • A kit repair that didn’t last
  • Chips caused by builders
  • A cracked acrylic bath

What your quote should include

  • Aftercare advice
  • A fixed price, and whether VAT is included
  • If travel is included in the price
  • What happens if they find more damage

Choosing a repair company

Honest limits

Some jobs aren’t right for a repair, for example:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Wear across the whole surface, which needs re-enamelling

If in doubt, send pictures and we’ll say what we think before you book.

Materials we work on in Cellarhead

  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding

Landlords, agents and businesses in Cellarhead

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

For anyone letting property in or around Cellarhead, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Do not leave a fresh chip for long
  • Fix dripping taps early to stop staining and limescale
  • Do not scrub with anything abrasive
  • Store metal items away from the bath

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

About Cellarhead

Cellarhead is about 4 miles north-east of Longton, in Staffordshire. Anywhere in ST9, we carry out the work at your property. Our repair technicians cover all 512 towns and villages in Staffordshire. Our jobs stretch from Cellarhead to Manchester (about 32 miles away).

Every address in ST9 is within our area. Local streets include Leek Road, March Lane and Heath Avenue. If you are just outside Cellarhead, we cover Wetley Rocks (1 mile north-east), Werrington (1 mile west), Blakeley Lane (1 mile east), Armshead (1 mile west) and Consall (1 mile north-east). Larger places within reach include Stafford (15 miles south), Newcastle-under-Lyme (7 miles west), Longton (4 miles south-west), Stone (10 miles south), Leek (6 miles north) and Biddulph (8 miles north-west).

What’s near Cellarhead

Around Cellarhead, we work in homes near Bowling Green pub, Church of St John the Baptist and St John's CofE (C) Primary School and the streets around them. For rail, the closest station is Longton station, roughly 3.9 miles south-west. Further afield, we also cover the area around St Edward's Hospital (3.9 miles north) and Nursing History Museum (3.8 miles north). Open spaces near Cellarhead include Coombes Valley RSPB reserve.

Map of Cellarhead © OpenStreetMap contributors

Your questions about bath repair in Cellarhead

Do you repair coloured baths?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Mention it when you send pictures.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Is the work guaranteed?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Do you charge for travel?

We do not add a call-out fee. Your fixed quote includes everything.

Do you come to Cellarhead?

Yes. We cover the entire UK and travel to Cellarhead. Send photos and we will quote, or call 0345 017 0787.

Is a bath repair permanent?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

What we do, step by step

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Clear toiletries, mats and anything else from around the area
  • Let us know if it has been repaired before

Ask for a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a fixed price

Read more

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

Should you replace it?

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why book with us

  • Colours mixed by hand to suit your surface
  • Rooms protected and left tidy
  • One price list for the entire UK
  • Repair technicians who travel to you, UK-wide

Take a look at our prices page and resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.