Staffordshire · England
Bath Repair in Kingsley Moor
Our technicians come to Kingsley Moor for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A hole punched through by something heavy
- An old repair that has yellowed or come loose
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Colour-matched on site
- No extra charge for your area
- Most jobs done in one visit
- One-year guarantee on every repair
Take a look at our full price list and bath cost comparison.
Bath repair at your home in Kingsley Moor
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair acrylic, pressed steel enamel and whirlpool & spa baths, and people most frequently call us about a failed DIY repair that’s discoloured or lifting and hairline or through cracks in acrylic.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Kingsley Moor (ST10)
- Area hub
- Staffordshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair cannot fix
A repair is not right for every job, for example:
- A bath that moves underfoot, until its support is fixed
- Wear across the whole surface, which needs re-enamelling
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
Towns and villages near Kingsley Moor
Also in Kingsley Moor
Landlord and trade work in Kingsley Moor
We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
For anyone letting property in or around Kingsley Moor, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Kingsley Moor and nearby
Kingsley Moor is about 3 miles north-west of Cheadle, in Staffordshire. From the centre of Kingsley Moor to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in 512 places in Staffordshire, from the larger towns to small villages. You can also see our page for Manchester, about 33 miles away.
We work across the ST10 postcode area and the streets around it. If you are just outside Kingsley Moor, we cover Blakeley Lane (1 mile north-west), Consall (1 mile north-west), Cellarhead (2 miles west), Wetley Rocks (2 miles north-west) and Werrington (3 miles west). We also work in nearby towns such as Stafford (15 miles south), Newcastle-under-Lyme (9 miles west), Longton (5 miles west), Stone (10 miles south-west), Leek (6 miles north) and Biddulph (9 miles north-west).
What’s near Kingsley Moor
Locally, our jobs take us to homes close to Wolstanton Grammar School. The nearest railway station is Blythe Bridge station, roughly 3.8 miles south-west. A little further out are Cheadle Hospital (2.5 miles south-east). The countryside around Kingsley Moor includes Harston Wood.
Questions from Kingsley Moor
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Can you price it without visiting?
In nearly every case. If photos do not show enough, we will ask for another angle.
Do you work in Kingsley Moor?
We do. Technicians travel to Kingsley Moor from across the region, and the price is the same as everywhere else.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
What happens on the day
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the following day, the bath is ready to use.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Advice
How to care for the repair
To keep it looking its best:
- Have new chips seen to early
- Make sure an acrylic bath is firm underfoot
- Do not leave razors or cans standing in the bath
- Give the bath a quick rinse after use
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
What affects the price in Kingsley Moor
Prices start from £95. There’s no charge for travel to Kingsley Moor. The price comes down to:
- The material and finish
- How hard the colour is to match
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Phone photos are fine, there is no need for anything special. Make sure they show:
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Natural light rather than flash
Upload photos of the damage and one of the whole item, with your ST10 postcode, and we will come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
