Surrey · England

Bath chip & crack repair in Chaldon, Surrey

Local bath repair for Chaldon: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • A hole punched through by something heavy
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Chaldon?

About our bath repair in Chaldon

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. If you are dealing with hairline or through cracks in acrylic and a chip where the taps sit, we can usually put it right.

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.

Where
Chaldon (CR3)
Region
Surrey
Guarantee
12 months on all our work
Quotes
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Get a dripping tap fixed promptly
  • Do not scrub with anything abrasive
  • Clean with warm water and a mild detergent
  • Protect the bath with a towel when doing jobs nearby

Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.

Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.

Your questions about bath repair in Chaldon

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

What happens once I’ve sent photos?

You’ll get a fixed quote back, normally with dates to choose from. You’re under no obligation.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Is a cracked acrylic bath repairable?

Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.

What areas do you cover?

The whole UK, including all of Surrey. Just include your postcode and we’ll confirm dates.

How invisible is a bath repair?

On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders in Chaldon.

It’s been repaired before. Can you still fix it?

Normally, yes. The old repair comes out first, so mention it when you send photos.

What bath repair costs

Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:

  • The type of damage
  • How much damage there is
  • Doing more than one item at once
  • Unusual colours or finishes

The price reflects the work involved, not where you live. The full price is agreed before you book.

Send pictures for a quote

When you take your pictures, a few simple things make all the difference:

  • Daylight if possible, and no flash reflection
  • A wider photo showing the entire bath
  • The postcode, so we can plan the visit
  • Details of any past repairs

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you’re under no obligation.

Repairs by material

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.

What a repair can’t fix

A repair isn’t right for every job, for example:

  • A bath worn all over, where resurfacing makes more sense
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Metal that has corroded all the way through

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Chaldon

  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

What happens on the day

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for a few hours, depending on the damage. Before we go, we’ll explain when it can be used and how to look after it.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the next day.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Mention if the room is upstairs or in a flat
  • Mention any earlier repairs or resurfacing

Ask for a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Send pictures for a quote

Advice

Repairing versus replacing in Chaldon

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Fixed prices from your photos
  • Colour-matched on site
  • Dust sheets down, tidy finish

See our pricing and guide to resurfacing and replacement costs.

Where we work around Chaldon

Chaldon is about 1 mile south-west of Caterham, in Surrey. Jobs in Chaldon are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Chaldon is one of 395 towns and villages in Surrey where we work. Our jobs stretch from Chaldon to London (about 15 miles away).

Every address in CR3 is within our area, from the main roads to the quietest streets. Streets in the area include Mount Avenue, Linden Drive and Marshall Close, all of which we cover. You’ll find Chaldon on the B2031, so it’s easy for us to reach. Neighbouring places we cover include Netherne on-the-Hill (2 miles north-west), Merstham (2 miles west), Brewer Street (2 miles south), South Merstham (2 miles south-west) and Hooley (2 miles west). Larger places within reach include Epsom (8 miles north-west), Horley (7 miles south), Redhill (4 miles south-west), Ewell (8 miles north-west), Reigate (5 miles south-west) and Walton-on-Thames (15 miles north-west).

Landmarks near Chaldon

Our customers here include homes close to St Peter and St Paul CofE Infant School, Church of St Peter and St Paul and The King And Queen Public House and the streets around them. Also close by are Kitchen Copse (1.7 miles south), Oakhyrst Grange School (0.7 miles south-east) and de Stafford School (1.3 miles north-east). The nearest railway station is Caterham station, roughly 1.2 miles east of the centre. A little further out are Bletchingley Castle (2.8 miles south) and St Lawrence's Hospital (0.5 miles north-east). The countryside around Chaldon includes South London Downs National Nature Reserve and Nore Hill.

Map of Chaldon © OpenStreetMap contributors

Do you need bath repair in Chaldon?

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Most people get in touch after spotting something like this:

  • A chip where the taps sit
  • Deep scratches in acrylic
  • Rust spots around the plughole
  • A chipped rim or side

Before you book anyone

  • Who will actually do the work
  • What protection goes down before work starts
  • What happens if the damage is worse than the pictures show
  • When it can be used again

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.