Somerset · England
Bath chip & crack repair in Chapel Allerton, Somerset
Bath repair for Chapel Allerton, without a refit. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
How we price bath repair
Prices start from £95. You won’t pay by the hour. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How many areas need work
- Previous DIY repairs that have to come out
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Send pictures for a quote
You can generally get a fixed price without us visiting. To help us price it:
- A picture taken from further back
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- Natural light rather than flash
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
About our bath repair in Chapel Allerton
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We work on whirlpool & spa baths, roll-top & freestanding and acrylic, and common reasons people contact us are a chip where the taps sit and rust by the waste and overflow.
All of our repairs are guaranteed for twelve months in Chapel Allerton and everywhere else. If something goes wrong with the work, we come back.
- Where
- Chapel Allerton (BS26)
- Region
- Somerset
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It generally takes a few hours, and you can get on with other things while we are there.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Related advice
Work for landlords and builders
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Don’t leave a fresh chip for long
- Store metal items away from the bath
- Don’t scrub with anything abrasive
- Make sure an acrylic bath is firm underfoot
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
About Chapel Allerton
Chapel Allerton is about 6 miles east of Burnham-on-Sea, in Somerset. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in 640 places in Somerset.
Here we cover the BS26 postcode area. Local streets include Front Street, Back Lane and Scotland Lane. Other places close to Chapel Allerton include Ashton (1 mile south-east), Stone Allerton (1 mile north-west), Alston Sutton (1 mile north-east), Brinscombe (1 mile north-east) and Weare (2 miles north). We also work in nearby towns such as Bridgwater (11 miles south-west), Burnham-on-Sea (6 miles west), Wells (9 miles east), Shepton Mallet (14 miles east), Street (10 miles south-east) and Glastonbury (9 miles south-east).
Local landmarks in Chapel Allerton
In Chapel Allerton, that means homes near Hugh Sexey Church of England Middle School, Wheatsheaf Inn and The Parish Church, among other places. Further afield, we also cover the area around Goughs Motor Museum (3.9 miles north-east). Not far away are Wavering Down and Kingswood.
Places near Chapel Allerton
What else we do in Chapel Allerton
Honest limits
We will not take on work that will not last, so here’s what a repair can’t put right:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
What we’re called out for in Chapel Allerton
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
Keep an eye out for any of the following:
- A cracked acrylic bath
- Chips under the taps
- Rust spots around the plughole
- Scuffs and scratches in the surface
What your quote should include
- A fixed price, and whether VAT is included
- Whether they match the colour on site
- How to look after the finish
- What happens if they find more damage
Questions from Chapel Allerton
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Which areas do you work in?
The whole UK, including all of Somerset. Send your postcode with your pictures and we will offer you dates.
What does bath repair cost?
Repairs from £95. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can a cracked acrylic bath be fixed?
Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
About our accreditations · Every repair comes with a one-year guarantee.
