Somerset · England

Bath chip & crack repair in Weare, Somerset

Bath repair for Weare, without a refit. Get a fixed quote from your pictures, then we come to you.

  • Repairs from £95
  • Rusty patches near the plughole
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Weare

DIY kit or professional repair?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Bath repair at your home in Weare

We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. We work on roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and people most frequently call us about a failed DIY repair that’s discoloured or lifting and chips on the rim or sides.

We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.

Area
Weare (BS26)
Region
Somerset
Warranty
One year on every repair
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

When a repair isn’t the answer

It helps to know what we can’t do:

  • A bath worn all over, where resurfacing makes more sense
  • Cracks in acrylic we cannot reach from underneath
  • Water coming from the waste or taps rather than the bath

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Weare

  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel

Landlord and trade work in Weare

We are used to working with agents and managing companies. Just send pictures, the address and how to get access.

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

What your bath is made of matters

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Looking after it afterwards

Nothing complicated is needed:

  • If an acrylic bath flexes, have its feet adjusted
  • Avoid scourers, wire wool and gritty cream cleaners
  • Don’t leave razors or cans standing in the bath
  • Cover the bath during DIY or decorating

A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.

Where we work around Weare

Weare is about 7 miles east of Burnham-on-Sea, in Somerset. Our technicians come to clients in Weare, so you don’t need to take anything anywhere. We work in 640 places in Somerset.

Every address in BS26 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Henmore Lane, Coombe Lane and Sparrow Hill Way and the roads around them. We also travel to Lower Weare (1 mile north-west), Brinscombe (1 mile south-east), Alston Sutton (1 mile south), Badgworth (1 mile west) and Cross (1 mile north). Further out, we also cover Bridgwater (12 miles south-west), Burnham-on-Sea (7 miles west), Wells (9 miles south-east), Shepton Mallet (14 miles south-east), Street (11 miles south-east) and Glastonbury (10 miles south-east).

Near you in Weare

Around Weare, we work in homes near The Lamb at Weare pub, Weare Academy First School and Church of St Gregory. Other landmarks nearby include Goughs Motor Museum (3.1 miles east) and Banwell Castle (3.7 miles north). For a walk, there’s Wavering Down and Kingswood.

Map of Weare © OpenStreetMap contributors

How we price bath repair

Repairs from £95. You will not pay by the hour. The price depends on:

  • The material
  • Whether old repairs or coatings need taking off
  • How easy the damage is to reach
  • How many items we do on one visit

Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Quotes from your photos

Almost every job we do is priced from pictures. This is what to send:

  • One sharp close-up of the damage
  • Any details about the material
  • Any earlier repairs or coatings
  • One picture of the entire bath

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.

Repair or replace: which is better?

Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Why us?

  • We leave the room as we found it
  • CHAS and Constructionline accredited
  • We will tell you if it’s not worth repairing
  • Technicians who travel to you, UK-wide

Read our pricing or guide to resurfacing and replacement costs.

The process

We work cleanly and quietly. We protect the area first, then the work takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the day after.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Move bottles, mats and clutter away from the area
  • Have a window or extractor fan available

Ask for a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a free quote

Advice

Questions from Weare

Will the repair show?

On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Can you repair several things at once?

Of course, and it typically saves money. Just add the extra items to your photos and we’ll quote them together.

How do I get a price for bath repair in Weare?

Prices start from £95. Every job gets a fixed price based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

What happens after I send pictures?

You will get a fixed quote back. You’re under no obligation.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Weare.

Do the materials smell?

There may be a mild smell during the work.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.