Wiltshire · England

Bath chip & crack repair in Chapel Plaister, Wiltshire

Damaged bath in Chapel Plaister? We repair it in place, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Chapel Plaister

How we handle bath repair in Chapel Plaister

A typical bath repair is a few hours’ work, and you can normally bathe again the next day. There is no need to book a plumber or tiler, because nothing is disconnected. Our technicians work on acrylic, roll-top & freestanding and cast iron enamel, and common reasons people contact us are chips on the rim or sides and cracks in an acrylic bath.

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Location
Chapel Plaister (SN13)
County
Wiltshire
Cover
12 months on all our work
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Prices and what affects them

Repairs from £95. Every quote is fixed and free. What we take into account:

  • Whether it’s a chip, crack, burn or wear
  • The colour and finish to match
  • Previous DIY repairs that have to come out
  • How many items we do on one visit

What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.

How to get a fixed quote

Before you send pictures, a few simple things make all the difference:

  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before
  • A coin or ruler next to the damage for scale
  • One picture of the entire bath

Upload a picture of the damage and a wider shot of the entire item, with your SN13 postcode, and we’ll reply with a fixed quote.

Do you need bath repair in Chapel Plaister?

Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

These are the problems we’re asked about most:

  • Impact holes in acrylic
  • A cracked acrylic bath
  • A failed DIY repair that is discoloured or lifting
  • Rust spots around the plughole

Questions to ask before you book

  • Aftercare advice
  • What protection goes down before work starts
  • Whether there are any call-out or travel charges
  • A fixed quote, and whether VAT is included

10 questions to ask before booking

Landlord and trade work in Chapel Plaister

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Your questions about bath repair in Chapel Plaister

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

When can I have a bath again?

Generally within a day, though it depends on what we’ve done.

How do I book?

Use the quote form or ring 0345 017 0787, and we’ll do the rest.

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Can I add another job to the visit?

Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.

Is there any odour?

It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.

Can you repair a crack in an acrylic bath?

Normally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.

Is a repair better than a new one?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

Repairing versus replacing in Chapel Plaister

People often assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why book with us

  • Colours mixed by hand to suit your surface
  • We’ll tell you if it’s not worth repairing
  • Same prices wherever you are
  • Work done at your home or business

Take a look at our pricing and bath cost comparison.

Chapel Plaister and the surrounding area

Chapel Plaister is about 5 miles north-west of Melksham, in Wiltshire. From the centre of Chapel Plaister to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our technicians cover all 425 towns and villages in Wiltshire, from the larger towns to small villages. You can also see our page for Birmingham, about 75 miles away.

Every address in SN13 is within our area, from the main roads to the quietest streets. Other places close to Chapel Plaister include Wadswick (1 mile south-east), Henley (1 mile west), Box (1 mile north-west), Box Hill (1 mile north) and Kingsdown (1 mile west). Further out, we also cover Trowbridge (6 miles south), Chippenham (6 miles north-east), Calne (10 miles east), Devizes (11 miles east), Westbury (10 miles south) and Melksham (5 miles south-east).

Landmarks near Chapel Plaister

Locally, our jobs take us to homes close to Church of St Thomas A Becket, Box Church of England Primary School and Box Primary School and the streets around them. Chapel Plaister’s nearest station is Melksham station, roughly 4.3 miles south-east of the centre. Nearby you’ll also find Melksham Community Hospital (5.2 miles south-east) and Corsham (3 miles north). For a walk, there is Vincients Wood.

Map of Chapel Plaister © OpenStreetMap contributors

The process

We agree an arrival time beforehand, so you are not left guessing. On site, it takes a morning or an afternoon in most cases. We leave the room clean.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Mention if the room is upstairs or in a flat
  • Point us to the nearest place to park

Getting a price

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.

Send pictures for a quote

Read more

What we can’t put right

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Acrylic cracks with no access behind them
  • A bath that moves underfoot, until its support is fixed
  • Rust that has eaten right through a steel bath

Not sure? Send pictures and we’ll give you a straight answer before you book.

What we work on

  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding

How to care for the repair

After the repair has cured, a few habits help it last:

  • Rinse the bath after use, especially in hard water areas
  • Ensure an acrylic bath is firm underfoot
  • Don’t leave razors or cans standing in the bath
  • Clean with warm water and a mild detergent

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.