Cheshire West and Chester · England
Bath Repair in Churton
Chip and crack repairs to enamel, acrylic and cast iron baths in Churton, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chip where the taps sit
- An old repair that has yellowed or come loose
Churton questions
What does bath repair cost?
Prices start from £95. We give a fixed quote from your photos. Send a close-up and a picture of the entire item with your CH3 postcode.
Can rust on a bath be repaired?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you work in Churton?
We do. Technicians travel to Churton from across the region, with no extra charge for travel.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Bath repair in Churton, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. We regularly repair roll-top & freestanding, pressed steel enamel and acrylic, and people most frequently call us about a chipped rim or side and impact holes in acrylic.
Big or small, you get the same one-year guarantee.
- Location
- Churton (CH3)
- Area hub
- Cheshire West and Chester
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Signs you need bath repair in Churton
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Send us a photo if you notice any of these:
- Rust by the waste and overflow
- A hole punched through by something heavy
- A cracked acrylic bath
- Chips on the rim or sides
Comparing quotes
- What aftercare is recommended
- Who will actually do the work
- How long the guarantee is and what it covers
- Whether the price covers travel
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- How much damage there is
- The colour and finish to match
- What the surface is made of
- How many items we do on one visit
Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your pictures
Before you send photos, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- Whether it’s been repaired or coated before
- One picture of the whole bath
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Keeping it looking good
To keep it looking its best for years:
- Get any new chip repaired before it rusts
- Don’t scrub with anything abrasive
- Rinse the bath after use, especially in hard water areas
- Don’t leave razors or cans standing in the bath
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- One-year guarantee on every repair
- One visit for most repairs
- Work done at your home or business
- Colours mixed by hand to suit your surface
See our pricing or guide to resurfacing and replacement costs.
Churton and nearby
Churton is about 6 miles north-east of Wrexham, in Cheshire West and Chester. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover 224 places across Cheshire West and Chester. Our nearest city page is Liverpool, about 21 miles away.
We work across the CH3 postcode area and the streets around it. You will find streets such as Walnut Croft, Chester Road and New Lane. If you are just outside Churton, we cover Aldford (2 miles north), Aldersey Green (3 miles east), Bruera (3 miles north-east), Milton Green (3 miles north-east) and Eccleston (4 miles north). Within a short drive, we also cover Chester (6 miles north), Ellesmere Port (12 miles north), Winsford (15 miles north-east), Neston (15 miles north-west), Boughton (6 miles north) and Frodsham (15 miles north-east).
Around Churton
We visit homes around Farndon Primary School. Nearby you will also find Trevalyn Manor (3.1 miles west) and Holt Castle (1.8 miles south). Open spaces near Churton include The Flash.
When a repair isn’t the answer
It helps to know what we can’t do:
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What happens on the day
We turn up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes two to three hours for most chips, and we leave the room as we found it.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Related advice
Also near Churton
Other services in Churton
About our accreditations · Every repair comes with a one-year guarantee.
