Devon · England

Bath chip & crack repair in Clawton, Devon

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Clawton. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Rusty patches near the plughole
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Clawton

How we handle bath repair in Clawton

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We’re often asked to fix a hole punched through by something heavy and scuffs and scratches in the surface, across roll-top & freestanding, pressed steel enamel and acrylic.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Location
Clawton (EX22)
Region
Devon
Warranty
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

DIY repairs versus a professional job

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

Landlord and trade work in Clawton

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

What a repair cannot fix

Not everything can be repaired, and we’d rather say so up front. We cannot fix:

  • Water coming from the waste or taps rather than the bath
  • A bath that moves underfoot, until its support is fixed
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel

About Clawton

Clawton is about 9 miles north of Launceston, in Devon. Whether you’re in the middle of Clawton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Clawton is one of 586 towns and villages in Devon where we work.

Every address in EX22 is covered, from the main roads to the quietest streets. Other places close to Clawton include Whimble (3 miles north), Derriton (3 miles north-west), Ashwater (3 miles south-east), Torridge (3 miles north) and Holsworthy (3 miles north). We also work in nearby towns such as Okehampton (15 miles east), Great Torrington (15 miles north-east), Hatherleigh (12 miles east) and Lifton (9 miles south).

What’s near Clawton

Typical jobs here are in homes near Clawton Primary School and Church of St Leonard, among other places. Nearby you will also find Holsworthy Museum (3.2 miles north).

Map of Clawton © OpenStreetMap contributors

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.

What happens on the day

We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a morning or an afternoon, and we leave the room as we found it.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Make sure the room can be ventilated
  • Avoid using the area for a few hours before we arrive
  • Plan for the room to be out of bounds to pets and children

Getting a price

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.

Get a free quote

Read more

Do you need bath repair in Clawton?

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

Look out for these signs:

  • Scratches you can feel with a fingernail
  • Chips along the edge of the bath
  • A cracked acrylic bath
  • Damage beneath the taps

Comparing quotes

  • What happens if they find more damage
  • Who will actually do the work
  • What aftercare is recommended
  • How soon you can use it again

How to compare quotes

Keeping it looking good

So the finish stays in good condition:

  • Have new chips seen to early
  • Check that an acrylic bath does not move when you stand in it
  • Clean with warm water and a mild detergent
  • Store metal items away from the bath

Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

Questions from Clawton

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

Something went through my bath. Can it be fixed?

Generally. Photos of the hole and the underside help us check.

What do you need from me?

Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.

I tried a repair kit. Can you fix it?

Regularly. We strip it out, deal with any rust and repair it again.

Is the work guaranteed?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.

Should you replace it?

Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

What you get with us

  • Colour mixed on the day to match
  • Everything repaired in place
  • Most jobs done in one visit
  • Free fixed quotes from pictures

See our prices page or resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.