Gloucestershire · England
Bath Repair in Cleeve Hill
Bath repair across Cleeve Hill and nearby, generally in one visit.
- Repairs from £95
- Scratches you can feel with a fingernail
- Snagging damage from a refit
Bath repair in Cleeve Hill without replacing anything
Most of our bath repairs take a few hours, and you can usually bathe again the day after. You will not need a plumber or tiler, because nothing is disconnected. We regularly repair roll-top & freestanding, whirlpool & spa baths and acrylic, and people most often call us about chips along the edge of the bath and chips under the taps.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Cleeve Hill (GL52)
- County
- Gloucestershire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Cleeve Hill
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Do you come to Cleeve Hill?
Yes, we do. We send a technician to Cleeve Hill for every job, and the price is the same as everywhere else.
How long does the repair take to cure?
Normally the following day. We will tell you the exact curing time when we finish.
Can you redo an old repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Which areas do you work in?
Everywhere in the UK, Cleeve Hill included. There’s no extra charge for travel.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Repairing versus replacing in Cleeve Hill
Swapping a damaged bath for a new one generally means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- Dust sheets down, tidy finish
- Everything repaired in place
- Every repair guaranteed for a year
- We will tell you if it’s not worth repairing
Read our pricing or bath cost comparison.
Our work in Cleeve Hill
Cleeve Hill is about 2 miles east of Bishop's Cleeve, in Gloucestershire. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Cleeve Hill is one of 470 towns and villages in Gloucestershire we cover. Our jobs stretch from Cleeve Hill to Birmingham (about 37 miles away).
Jobs in GL52 are booked in the same way as anywhere else. Local streets include Stockwell Lane and Post Office Lane. If you’re just outside Cleeve Hill, we cover Woodmancote (1 mile west), Southam (1 mile south-west), Bishop's Cleeve (2 miles west), Gotherington (2 miles north-west) and Prestbury (2 miles south). Larger places within reach include Cheltenham (4 miles south-west), Gloucester (11 miles south-west), Tewkesbury (6 miles north-west), St Paul's (4 miles south-west), Lansdown (4 miles south-west) and Fairview (3 miles south-west).
Local landmarks in Cleeve Hill
Our clients here include homes close to Woodmancote School, Anglican Church Of St Peter and Cleeve School and the streets around them. The nearest railway station is Cheltenham Spa station, roughly 4.5 miles south-west of the centre. Nearby you will also find Winchcombe Castle (2.6 miles east) and The Bugatti Trust Museum (1.3 miles north). The countryside around Cleeve Hill includes Nottingham Hill.
Looking after it afterwards
Once the work has cured, treat it gently:
- Protect the bath with a towel when doing jobs nearby
- Give the bath a quick rinse after use
- Don’t leave razors or cans standing in the bath
- Clean with warm water and a mild detergent
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Honest limits
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Wear across the entire surface, which needs re-enamelling
Send us pictures and we’ll tell you honestly.
Materials we work on in Cleeve Hill
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
What affects the price in Cleeve Hill
Prices start from £95. Every quote is fixed and free. What we look at:
- How many areas need work
- How many items we do on one visit
- How easy the damage is to reach
- Previous DIY repairs that have to come out
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
The better the photos, the more accurate the price. Here’s what helps:
- What it’s made of, if you know
- Details of any past repairs
- Something in shot to show the size
- One picture of the whole bath
If you are in Cleeve Hill and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a morning or an afternoon.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the day after.
Preparing for the visit
- Keep pets and children out of the room while we work
- Open a window if you can
- Mention if the room is upstairs or in a flat
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Nearby places to Cleeve Hill
Also in Cleeve Hill
Landlord and trade work in Cleeve Hill
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
