Somerset · England
Bath chip & crack repair in Clewer, Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths in Clewer, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips along the edge of the bath
- Rust by the waste and overflow
Bath repair at your home in Clewer
A typical bath repair is a few hours’ work, and the bath is back in use the following day. You will not need a plumber or tiler, because the bath doesn’t move. Typical jobs include a chipped rim or side and hairline or through cracks in acrylic, on acrylic, pressed steel enamel and roll-top & freestanding.
You get a one-year guarantee, the same in Clewer as everywhere else we work.
- Area
- Clewer (BS28)
- County
- Somerset
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Questions from Clewer
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Clewer and the surrounding area
Clewer is about 7 miles north-west of Wells, in Somerset. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We work in 640 places across Somerset.
We cover every part of BS28 and the streets around it. If you are just outside Clewer, we cover Crickham (1 mile south-west), Cocklake (1 mile south), Brinscombe (1 mile north-west), Alston Sutton (2 miles west) and Ashton (2 miles south-west). We also work in nearby towns such as Bridgwater (12 miles south-west), Burnham-on-Sea (8 miles west), Wells (7 miles south-east), Midsomer Norton (14 miles east), Shepton Mallet (12 miles south-east) and Street (10 miles south).
Landmarks near Clewer
We visit homes around The Kings of Wessex Academy and The Trotter Inn and the streets around them. A little further out are Goughs Motor Museum (2.2 miles north-east). The countryside around Clewer includes Kingswood and Wavering Down.
What affects the price in Clewer
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- What kind of damage it is
- How hard the colour is to match
- Whether we combine several jobs
- Access to the area
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
You can take the photos on your phone, there’s no need for anything special. Make sure they show:
- A coin beside the damage so we can judge size
- Any details about the material
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
If in doubt, send photos and we’ll say what we think.
What we work on
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
Do you need bath repair in Clewer?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
These are the problems we’re asked about most:
- Impact holes in acrylic
- Chips along the edge of the bath
- A chip where the taps sit
- A cracked acrylic bath
What to look for in a quote
- When it can be used again
- Whether they match the colour on site
- If travel is included in the price
- How changes to the job are handled
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the following day.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- One-year guarantee on every repair
- Typically one visit, start to finish
- We leave the room as we found it
- A fixed quote before you book
Read our pricing and guide to resurfacing and replacement costs.
Towns and villages near Clewer
What else we do in Clewer
About our accreditations · Every repair comes with a one-year guarantee.
