Somerset · England
Bath chip & crack repair in Cocklake, Somerset
Local bath repair for Cocklake: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Holes from dropped items
- A chipped rim or side
About our bath repair in Cocklake
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for damage beneath the taps and chips caused by builders, on roll-top & freestanding, acrylic and whirlpool & spa baths.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Location
- Cocklake (BS28)
- County
- Somerset
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath repair in Cocklake
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
Most people get in touch after spotting one of these:
- Holes from dropped items
- A cracked acrylic bath
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
What to look for in a quote
- What preparation is included
- How to look after the finish
- How long it needs to cure
- Whether they match the colour on site
Common questions in Cocklake
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
When can I have a bath again?
Typically within a day, though it depends on what we’ve done.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
What areas do you cover?
We work UK-wide, so Cocklake is covered. Our prices are the same everywhere.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we will ask for another angle.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Aftercare tips
After the repair has cured, a few habits help it last:
- Rinse it down after each bath
- Put a towel in the bath if you’re working above it
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Places near Cocklake
More services for Cocklake
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the job itself takes two to three hours for most chips. Before we leave, we explain the curing time and the aftercare.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Clear the area around the damage
- Let us know about parking or access
- Make sure the area is dry
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why us?
- Every repair guaranteed for a year
- Fixed prices from your pictures
- Dust sheets down, tidy finish
- Nothing taken out or refitted
Take a look at our prices page and guide to resurfacing and replacement costs.
Cocklake and nearby
Cocklake is about 7 miles west of Wells, in Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Cocklake is one of 640 towns and villages in Somerset we cover.
Every address in BS28 is within our area. We regularly work on streets such as Cheddar Road, Rughill and Dungeon and the roads around them. Nearby, we also work in Crickham (1 mile north-west), Clewer (1 mile north), Wedmore (1 mile south), Ashton (2 miles west) and Brinscombe (2 miles north-west). Larger places within reach include Bridgwater (12 miles south-west), Burnham-on-Sea (8 miles west), Wells (7 miles east), Midsomer Norton (14 miles east), Shepton Mallet (12 miles east) and Street (9 miles south).
Around Cocklake
In Cocklake, that means homes near Church of St Mary, Wedmore First School Academy and Hugh Sexey Church of England Middle School, among other places. Further afield, we also cover the area around Goughs Motor Museum (3 miles north-east). The countryside around Cocklake includes Wavering Down and Kingswood.
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- Wear across the whole surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
