Derbyshire · England
Bath chip & crack repair in Coal Aston, Derbyshire
Our technicians come to Coal Aston for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Holes from dropped items
- Rust spots around the plughole
Bath repair in Coal Aston, done in place
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Our technicians work on acrylic, cast iron enamel and whirlpool & spa baths, and common reasons people contact us are chips under the taps and chips along the edge of the bath.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Coal Aston (S18, S8)
- Region
- Derbyshire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Coal Aston
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
What happens after I send photos?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Are there extra charges for Coal Aston?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Avoid scourers, wire wool and gritty cream cleaners
- Cover the bath during DIY or decorating
- Check that an acrylic bath doesn’t move when you stand in it
- Get a dripping tap fixed promptly
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Signs you need bath repair in Coal Aston
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal lets water in, and rust follows.
People usually call us when they notice one of these:
- A chip where the taps sit
- Chips along the edge of the bath
- Damage done while the bathroom was being fitted
- Scuffs and scratches in the surface
Questions to ask before booking
- What preparation is included
- How changes to the job are handled
- The length of the guarantee and what it covers
- Whether they match the colour on site
Also in Coal Aston
Where we work around Coal Aston
Coal Aston is about 1 mile north-east of Dronfield, in Derbyshire. From the centre of Coal Aston to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 532 places across Derbyshire, from the larger towns to small villages. You can also see our page for Manchester, about 33 miles away.
All of S18 and S8 is covered, from the main roads to the quietest streets. That includes homes on Bents Lane, Brown Lane and Drury Lane. Close by, we cover Bowshaw (1 mile west), Summerley (1 mile south-east), Dronfield (1 mile south-west), Apperknowle (1 mile south-east) and Greenhill (2 miles north-west). Larger places within reach include Chesterfield (5 miles south), Bolsover (9 miles south-east), Staveley (5 miles south-east), Matlock (12 miles south), Clay Cross (10 miles south) and South Normanton (15 miles south).
Local landmarks in Coal Aston
In Coal Aston, that means homes near St Philip, Northfield Junior School and Oakes Park. You’ll also find Dronfield Henry Fanshawe School (0.8 miles south-west) and White Swan pub (0.9 miles south). For rail, the closest station is Dronfield station, about 0.9 miles south-west. Other landmarks nearby include Abbeydale Industrial Hamlet (2.7 miles north-west) and Nether Edge Hospital (3.8 miles north-west). Open spaces near Coal Aston include Blacka Moor Nature Reserve.
- Other local spots include Dronfield Urban District (0.7 miles south-west)
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
How it works
We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes a morning or an afternoon. The room is left tidy and ready to use once it has cured.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Make sure the area is dry
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Related advice
What affects the price in Coal Aston
Prices start from £95. A fixed quote means you know the cost before booking. We take into account:
- Access to the area
- Unusual colours or finishes
- The size and number of damaged areas
- The material and finish
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
You can normally get a fixed quote without us visiting. To make it quick:
- Something in shot to show the size
- Natural light rather than flash
- Where you are, by postcode
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
What we can’t put right
A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we can’t reach from underneath
- A steel bath rusted through
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
