Northamptonshire · England
Bath Repair in Cold Higham
Fixed-price bath repair in Cold Higham and the surrounding area, normally in one visit.
- Repairs from £95
- Chips along the edge of the bath
- A failed DIY repair that’s discoloured or lifting
Questions from Cold Higham
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
What about rust by the waste?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
How do I get a price for bath repair in Cold Higham?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Bath repair at your home in Cold Higham
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. We regularly repair roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and people most frequently call us about a cracked acrylic bath and holes from dropped items.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Cold Higham (NN12)
- County
- Northamptonshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours, depending on the damage. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the following day, the bath is ready to use.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Advice
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We work for landlords, letting agents and housing providers in Cold Higham as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Places near Cold Higham
More services for Cold Higham
Prices and what affects them
Repairs from £95. We price every job individually, from your photos. What matters most is:
- How much damage there is
- Access to the area
- How hard the colour is to match
- Any earlier repairs that need removing first
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- What it’s made of, if you know
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
Email us pictures of the damage and a wider shot of the entire item, and tell us you are in Cold Higham, and we will reply with a fixed price.
What we’re called out for in Cold Higham
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Keep an eye out for these signs:
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
- A cracked acrylic bath
Before you book anyone
- What protection goes down before work starts
- If travel is included in the price
- Whether a trained technician does the job
- When it can be used again
Our work in Cold Higham
Cold Higham is about 4 miles north-west of Towcester, in Northamptonshire. From the centre of Cold Higham to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Cold Higham is one of 364 towns and villages in Northamptonshire where we work. Our nearest city page is Birmingham, about 42 miles away.
Jobs in NN12 work the same way as everywhere else we cover. Whether you live on Church Lane and Banbury Lane or a nearby road, a technician can come to you. Other places close to Cold Higham include Pattishall (1 mile north-east), Grimscote (1 mile west), Astcote (1 mile east), Eastcote (1 mile east) and Litchborough (2 miles west). Within a short drive, we also cover Northampton (8 miles north-east), Daventry (8 miles north-west), Brackley (11 miles south-west), Towcester (4 miles south-east), Wolverton (12 miles south-east) and Stony Stratford (11 miles south-east).
Landmarks near Cold Higham
We visit homes around Church of St Luke and Pattishall Church of England Primary School and the streets around them. Further afield, we also cover the area around Farthingstone Castle Dykes (3.4 miles north-west). For a walk, there’s Ramsden Corner Plantation.
Repair or replace in Cold Higham?
Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Dust sheets down, tidy finish
- Everything repaired in place
- Straight answers about what a repair can do
- Most jobs done in one visit
See our full price list or resurfacing vs replacement cost guide.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Acrylic cracks with no access behind them
- Metal that has corroded all the way through
- Wear across the entire surface, which needs re-enamelling
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
