Northamptonshire · England
Bath Repair for Litchborough homes
Bath repair in Litchborough without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- A chipped rim or side
- Damage done while the bathroom was being fitted
Bath repair at your home in Litchborough
A typical bath repair is a few hours’ work, and the bath is back in use the following day. There’s no need to book a plumber or tiler, because the bath doesn’t move. We regularly repair whirlpool & spa baths, pressed steel enamel and acrylic, and common reasons people contact us are a kit repair that didn’t last and holes from dropped items.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Litchborough (NN12)
- Region
- Northamptonshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes a morning or an afternoon in most cases. The room is left tidy and ready to use once it has cured.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the following day, the bath is ready to use.
Preparing for the visit
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.
Read more
Also near Litchborough
More services for Litchborough
Keeping it looking good
So the finish stays in good condition for years:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Give the bath a quick rinse after use
- Don’t scrub with anything abrasive
- If an acrylic bath flexes, have its feet adjusted
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
FAQs for Litchborough
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you price it without visiting?
Nearly always. If photos do not show enough, we will ask for another angle.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Which areas do you work in?
Everywhere in the UK, Litchborough included. There is no extra charge for travel.
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Rooms protected and left tidy
- Colour mixed on the day to match
- No need to remove anything
- Every repair guaranteed for a year
Read our prices page or guide to resurfacing and replacement costs.
Litchborough and the surrounding area
Litchborough is about 5 miles north-west of Towcester, in Northamptonshire. We visit homes and businesses in Litchborough, so you do not need to take anything anywhere. Litchborough is one of 364 towns and villages in Northamptonshire where we work. We work right across the region, from Litchborough to Birmingham (40 miles away).
All of NN12 is covered. Streets in the area include Waits Yard, Northampton Road and Towcester Road, and we cover them all. Other places close to Litchborough include Grimscote (1 mile south-east), Cold Higham (2 miles east), Pattishall (2 miles east), Blakesley (3 miles south) and Astcote (3 miles east). We also work in nearby towns such as Northampton (9 miles north-east), Daventry (7 miles north-west), Brackley (11 miles south), Towcester (5 miles south-east), Wolverton (14 miles south-east) and Stony Stratford (13 miles south-east).
Near you in Litchborough
Typical jobs here are in homes near Church of St Martin and Old Red Lion Public House, among other places. Further afield, we also cover the area around Farthingstone Castle Dykes (1.8 miles north-west). Open spaces near Litchborough include Ramsden Corner Plantation.
Signs you need bath repair in Litchborough
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Typical reasons for a call-out include:
- A failed DIY repair that is discoloured or lifting
- Holes from dropped items
- Chips on the rim or sides
- Scuffs and scratches in the surface
Comparing quotes
- How changes to the job are handled
- What aftercare is recommended
- Who will actually do the work
- Whether the price covers travel
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
When a repair isn’t the answer
Before you book, it’s worth knowing the limits:
- Flexing caused by a failed cradle or loose feet
- Rust that has eaten right through a steel bath
- Cracks in acrylic we cannot reach from underneath
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we look at:
- How easy the damage is to reach
- How many items we do on one visit
- The material
- How hard the colour is to match
Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed price
Most quotes are done from pictures alone. To make it quick:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- What it’s made of, if you know
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
