Hampshire · England
Bath chip & crack repair in Cole Henley, Hampshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Cole Henley. Send pictures for a free, fixed quote.
- Repairs from £95
- Rust spots around the plughole
- A cracked acrylic bath
What affects the price in Cole Henley
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- The size and number of damaged areas
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Any details about the material
- Good light, ideally daylight, without flash glare
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Bath repair in Cole Henley, done in place
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Whether it’s impact holes in acrylic and rusty patches near the plughole, we can typically put it right, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Cole Henley (RG28)
- Area hub
- Hampshire
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Cole Henley
Also in Cole Henley
Signs you need bath repair in Cole Henley
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
People generally call us when they notice one of these:
- Scuffs and scratches in the surface
- A kit repair that didn’t last
- Chips on the rim or sides
- A cracked acrylic bath
What your quote should include
- What aftercare is recommended
- Whether a trained technician does the job
- Whether the price covers travel
- Whether they match the colour on site
How it works
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. You can expect it to take a few hours.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the day after.
Getting ready for the visit
- Clear the area around the damage
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Cole Henley as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Cole Henley questions
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can you repair a hole in a bath?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Which areas do you work in?
Everywhere in the UK, Cole Henley included. Travel is included in the price.
Repair or replace in Cole Henley?
Swapping a damaged bath for a new one generally means a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- A year’s guarantee on all work
- Usually one visit, start to finish
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list and guide to resurfacing and replacement costs.
Covering Cole Henley
Cole Henley is about 7 miles north-east of Andover, in Hampshire. Jobs in Cole Henley are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Our technicians cover all 683 towns and villages in Hampshire, from the larger towns to small villages. Our nearest city page is London, about 56 miles away.
Here we cover the RG28 postcode area. We also cover the places around Cole Henley: Wells-in-the-Field (2 miles south), Freefolk (2 miles south-east), Whitchurch (2 miles south), Wadwick (3 miles north-west) and St Mary Bourne (3 miles west). Further out, we also cover Basingstoke (10 miles east), Winchester (14 miles south), Andover (7 miles south-west), Tadley (10 miles north-east), Hyde (13 miles south) and Popley (11 miles east).
Near you in Cole Henley
Our customers here include homes close to Testbourne Community School. The closest station to Cole Henley is Whitchurch (Hampshire) station, about 1.4 miles south of the centre. Open spaces near Cole Henley include Ladle Hill.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
When we’d advise against a repair
We won’t take on work that won’t last, so these are the limits:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
- Leaking fittings, which need a plumber
Send us pictures and we will tell you honestly.
What we work on
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
