Cornwall · England

Bath chip & crack repair in Coombe, Cornwall

Chip and crack repairs to enamel, acrylic and cast iron baths in Coombe, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Cracks in an acrylic bath
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Coombe

When we would advise against a repair

A repair isn’t right for every job, for example:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Cracks in acrylic we can’t reach from underneath
  • A steel bath rusted through

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel

How we handle bath repair in Coombe

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. Our technicians work on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and people most often call us about damage beneath the taps and cracks in an acrylic bath.

A one-year guarantee comes as standard, so you are not left on your own once we have gone.

Area
Coombe (TR4)
Area hub
Cornwall
Cover
A year, on every repair
Quotes
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Keeping it looking good

Once the work has cured, treat it gently:

  • Get any new chip repaired before it rusts
  • Keep abrasive pads and gritty cleaners away from the bath
  • Check that an acrylic bath doesn’t move when you stand in it
  • Get a dripping tap fixed promptly

Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.

If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.

Different materials, different repairs

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Repair or replace: which is better?

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. We charge the same wherever you are, so there’s no premium for Coombe. The job itself decides the price: how much damage, what it’s made of and how many items.

Why Coombe clients choose us

  • Straight answers about what a repair can do
  • Accredited with CHAS, Constructionline and SafeContractor
  • Rooms protected and left tidy
  • Nothing taken out or refitted

Take a look at our full price list or bath cost comparison.

Our work in Coombe

Coombe is about 4 miles east of Redruth, in Cornwall. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Coombe is one of 644 places in Cornwall where we work.

Our visits in TR4 work the same way as everywhere else we cover. We also travel to Cusgarne (1 mile south-west), Hick's Mill (1 mile east), Frogpool (1 mile south), Bissoe (1 mile east) and Tresamble (1 mile south-west). Larger places within reach include Truro (4 miles north-east), Newquay (13 miles north), Falmouth (6 miles south-east), Camborne (7 miles west), Redruth (4 miles west) and Helston (10 miles south-west).

Landmarks near Coombe

We visit homes around Cusgarne Primary School, Richard Lander School and Cornish Arms. The nearest railway station is Perranwell station, about 1.4 miles south-east. Other landmarks nearby include Carn Brea Castle (4.7 miles west) and Royal Cornwall Hospital (3.4 miles north-east). Green spaces nearby include Daubuz Moors.

Map of Coombe © OpenStreetMap contributors

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

What bath repair costs

Prices start from £95. We price every job individually. What matters most is:

  • The material
  • How easy the damage is to reach
  • The type of damage
  • Doing more than one item at once

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

How to get a fixed quote

You can generally get a fixed quote without us visiting. To help us price it:

  • One picture of the entire bath
  • The material, if you know it
  • One sharp close-up of the damage
  • Where you are, by postcode

To get a price, send a couple of pictures using our quote form or call us. We’ll say right away if a repair is the right fix.

How the visit works

We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to care for it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Point us to the nearest place to park
  • Mention any earlier repairs or resurfacing

Get a quote

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

Get a fixed price

Related advice

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Coombe questions

Can I add another job to the visit?

Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.

I tried a repair kit. Can you fix it?

Yes, we do this frequently. We strip it out, deal with any rust and repair it again.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Do you cover Coombe?

Yes, we do. Repair technicians travel to Coombe from across the region, with no extra charge for travel.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Something went through my bath. Can it be fixed?

Typically. Send us a photo of the hole and one from under the bath if you can.

What about rust by the waste?

Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.