Somerset · England
Bath chip & crack repair in Corfe, Somerset
Bath repair for Corfe, without a refit. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- Damage beneath the taps
- Scratches you can feel with a fingernail
Bath repair in Corfe, done in place
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We regularly repair cast iron enamel, pressed steel enamel and acrylic, and the jobs we see most are snagging damage from a refit and cracks in an acrylic bath.
We stand behind the work with a one-year guarantee.
- Location
- Corfe (TA3)
- Region
- Somerset
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath repair in Corfe?
A cracked acrylic bath typically wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until it cracks.
Typical reasons for a call-out include:
- Damage beneath the taps
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
- Rust spots around the plughole
What to look for in a quote
- Whether a trained technician does the job
- What the guarantee covers, and for how long
- What aftercare is recommended
- Whether the price is fixed and includes VAT
Towns and villages near Corfe
More services for Corfe
Our work in Corfe
Corfe is about 3 miles south of Taunton, in Somerset. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We cover 640 places in Somerset.
Postcode districts we cover here: TA3. From Newton Court and Mill Lane or anywhere nearby, we can come to you. Neighbouring places we cover include Netherclay (1 mile east), Staple Fitzpaine (2 miles south-east), Stoke St Mary (2 miles north-east), Bickenhall (3 miles east) and West Hatch (3 miles east). Further out, we also cover Taunton (3 miles north), Bridgwater (11 miles north), Chard (9 miles south-east), Wellington (6 miles west), Crewkerne (15 miles south-east) and Sydenham (12 miles north-east).
Local landmarks in Corfe
Typical jobs here are in homes near Bishop Fox's School, White Hart Inn and Church of St Nicholas, among other places. The nearest railway station is Taunton station, roughly 3.5 miles north. Well-known places in the area include Orchard Shopping Centre (2.9 miles north) and Post Office Telecommunications Museum (2.8 miles north). Open spaces near Corfe include Bishopswood Meadows and Staple Hill.
Looking after it afterwards
Once the work has cured, treat it gently:
- Have new chips seen to early
- Give the bath a quick rinse after use
- Make sure an acrylic bath is firm underfoot
- Get a dripping tap fixed promptly
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Repairing versus replacing in Corfe
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Every repair guaranteed for a year
- One price list for the entire UK
- We’ll tell you if it’s not worth repairing
- A fixed quote before you book
Read our full price list and bath cost comparison.
How it works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and we start. It normally takes a few hours, depending on the damage, and we will keep you posted as we go.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Getting a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
What a repair can’t fix
It helps to know what we cannot do:
- Cracks in acrylic we cannot reach from underneath
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Corfe
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
How we price bath repair
Repairs from £95. Prices are worked out job by job. What matters most is:
- Access to the area
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- How many items we do on one visit
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.
Getting a price from photos
You can generally get a fixed quote without us visiting. To help us price it:
- A wider photo showing the whole bath
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Questions from Corfe
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Will I be able to see the repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair a hole in a bath?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
About our accreditations · Every repair comes with a one-year guarantee.
