Highland · Scotland
Bath Repair for Corran homes
Our repair technicians come to Corran for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips caused by builders
- Impact holes in acrylic
How we handle bath repair in Corran
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Our repair technicians work on roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and the jobs we see most are scratches you can feel with a fingernail and a failed DIY repair that’s discoloured or lifting.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Location
- Corran (PH33)
- Area hub
- Highland
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When a repair is not the answer
We won’t take on work that won’t last, so these are the limits:
- Wear across the entire surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
Send us pictures and we will tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
About Corran
Corran is in Highland. Whether you’re in the middle of Corran or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Corran is one of 253 towns and villages in Highland where we work. We work right across the region, from Corran to Glasgow (71 miles away).
We work across PH33. We also cover the places around Corran: Clo Mhuillin (1 mile south-west), Inchree (1 mile east), Kentallen (3 miles south), Duror (5 miles south) and Ballachulish (5 miles south-east). Larger places within reach include Fort William (8 miles north-east), Caol (10 miles north-east), Inverlochy (9 miles north-east) and Kinlochmore (11 miles east). Some remote addresses need extra planning, so it’s best to call first.
Near you in Corran
Around Corran, we work in homes near Ardgour Parish Church. The countryside around Corran includes Ardsheal Hill and Lochan na Luireach.
Nearby places to Corran
What else we do in Corran
Questions from Corran
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send photos.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you price it without visiting?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Prices and what affects them
Repairs from £95. There is no charge for travel to Corran. The price comes down to:
- The material
- What kind of damage it is
- Previous DIY repairs that have to come out
- Doing more than one item at once
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
It only takes a minute to photograph the damage. Please include:
- Whether it’s been repaired or coated before
- Natural light rather than flash
- One sharp close-up of the damage
- The postcode, so we can plan the visit
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take a few hours, depending on the damage, including clearing up.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the day after.
Before we arrive
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Landlords, agents and businesses in Corran
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Protect the bath with a towel when doing jobs nearby
- Get any new chip repaired before it rusts
- Keep abrasive pads and gritty cleaners away from the bath
- Fix dripping taps early to stop staining and limescale
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
When to call us in Corran
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Customers generally contact us about:
- An old repair that has yellowed or come loose
- Rust by the waste and overflow
- A chip where the taps sit
- Damage done while the bathroom was being fitted
What your quote should include
- What aftercare is recommended
- How long it needs to cure
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
About our accreditations · Every repair comes with a one-year guarantee.
