Argyll and Bute · Scotland

Bath chip & crack repair in Duror, Argyll and Bute

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Duror and across Argyll and Bute. Free, fixed quotes from your pictures.

  • Repairs from £95
  • A failed DIY repair that is discoloured or lifting
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Duror

Bath repair in Duror, done in place

You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. We are frequently asked to fix deep scratches in acrylic and rust by the waste and overflow, across cast iron enamel, whirlpool & spa baths and roll-top & freestanding.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Location
Duror (PA38)
Region
Argyll and Bute
Cover
A year, on every repair
Price
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Landlord and trade work in Duror

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

How it works

There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to a few hours, including clearing up.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can usually use the bath the following day.

Before we arrive

  • Tell us if there are stairs or a lift
  • Keep pets and children out of the room while we work
  • Let the surface dry out before the visit

Ask for a price

Send us pictures of the damage and one of the entire item, with your PA38 postcode, and we’ll reply with a fixed price.

Get a fixed quote

Related advice

Covering Duror

Duror is in Argyll and Bute. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We work in 118 places across Argyll and Bute, from the larger towns to small villages. You can also see our page for Glasgow, about 67 miles away.

We work across the PA38 postcode area. Close by, we cover Kentallen (2 miles north-east), Clo Mhuillin (5 miles north), Corran (5 miles north), Inchree (5 miles north) and Ballachulish (6 miles east). If you are somewhere remote, call first so we can plan the visit.

What’s near Duror

Locally, our jobs take us to homes close to St Adamnan's Episcopal Church. The countryside around Duror includes Ardsheal Hill.

Map of Duror © OpenStreetMap contributors

FAQs for Duror

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do you come to Duror?

We do. Repair technicians travel to Duror from across the region, with no extra charge for travel.

What information do you need?

Send pictures through the quote form or call 0345 017 0787.

Is repairing better than replacing?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Will the repair last?

A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum.

What does bath repair cost?

Repairs from £95. We give a fixed price from your pictures. Send a close-up and a photo of the whole item with your PA38 postcode.

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair will not do:

  • Water coming from the waste or taps rather than the bath
  • Flexing caused by a failed cradle or loose feet
  • Cracks in acrylic we cannot reach from underneath

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel

Materials and what they mean for the repair

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

How to care for the repair

Looking after the surface is easy:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Don’t leave a fresh chip for long
  • Rinse it down after each bath
  • A dripping tap stains enamel, so fix it early

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.

Why repair rather than replace?

Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Why Duror customers choose us

  • No need to remove anything
  • Colours mixed by hand to suit your surface
  • We come to you, anywhere in the UK
  • We leave the room as we found it

See our prices page or bath cost comparison.

Do you need bath repair in Duror?

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

Common reasons people in Duror contact us are:

  • A cracked acrylic bath
  • A chip where the taps sit
  • Rust by the waste and overflow
  • Chips on the rim or sides

Questions to ask before you book

  • Aftercare advice
  • What happens if they find more damage
  • What the guarantee covers, and for how long
  • Whether the price is fixed and includes VAT

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.