Wiltshire · England
Bath Repair in Corsham
Damaged bath in Corsham? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips caused by builders
How we handle bath repair in Corsham
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Common call-outs are for chips caused by builders and cracks in an acrylic bath, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel.
All our work comes with our one-year guarantee.
- Location
- Corsham (SN13)
- County
- Wiltshire
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What we are called out for in Corsham
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Look out for any of the following:
- Chips under the taps
- A kit repair that didn’t last
- Chips along the edge of the bath
- Scratches you can feel with a fingernail
Before you book anyone
- How long it needs to cure
- How your room will be protected
- If travel is included in the price
- What prep work is covered
Landlords, agents and businesses in Corsham
If you manage property in Corsham, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Corsham and nearby
Corsham is about 4 miles south-west of Chippenham, in Wiltshire. Jobs in Corsham are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Corsham is one of 425 places in Wiltshire we cover. Our jobs stretch from Corsham to Birmingham (73 miles away).
All of SN13 is covered. Streets in the area include Station Road, High Street and Brakspear Drive, and we cover them all. Main roads around Corsham include the A4 and B3109, which makes travel easy. Other places close to Corsham include Cross Keys (1 mile north-east), Westrop (1 mile east), Gastard (2 miles south-east), Chapel Knapp (2 miles south-east) and Sheldon Corner (3 miles north-east). Within a short drive, we also cover Trowbridge (8 miles south), Chippenham (4 miles north-east), Calne (8 miles east), Devizes (11 miles south-east), Westbury (12 miles south) and Melksham (5 miles south-east). Being one of Wiltshire’s larger places, Corsham sees plenty of our work.
What’s near Corsham
Around Corsham, we work in homes near The Corsham Regis Primary Academy, Church of St Patrick and The Corsham School, among other places. For rail, the closest station is Melksham station, about 4.1 miles south-east of the centre. Further afield, we also cover the area around Lacock Abbey (3.5 miles east) and Chippenham Community Hospital (3.4 miles north-east). For a walk, there’s Vincients Wood.
Nearby places to Corsham
What else we do in Corsham
Repair or replace in Corsham?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Why Corsham customers choose us
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- Rooms protected and left tidy
- Colour mixed on the day to match
Read our pricing and resurfacing vs replacement cost guide.
What a repair cannot fix
Some jobs are not right for a repair, for example:
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
How it works
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow two to three hours for most chips from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Common questions in Corsham
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
Do you work in Corsham?
Yes. We work across the UK and travel to Corsham. Send us photos for a fixed quote, or call 0345 017 0787.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Corsham.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
What happens once I’ve sent photos?
You will get a fixed quote back. There’s no obligation to book.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
- Protect the bath with a towel when doing jobs nearby
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
About our accreditations · Every repair comes with a one-year guarantee.
