Wiltshire · England
Bath chip & crack repair in Corton, Wiltshire
Bath repair in Corton without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Rust spots around the plughole
- An old repair that has yellowed or come loose
What a repair can’t fix
A repair is not always the answer, and we’d rather say so up front. We cannot fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
Bath repair at your home in Corton
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. Common call-outs are for rust by the waste and overflow and chips along the edge of the bath, in roll-top & freestanding, cast iron enamel and whirlpool & spa baths.
All our work is covered by our one-year guarantee, wherever you are in Wiltshire.
- Area
- Corton (BA12)
- Area hub
- Wiltshire
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Corton
Prices start from £95. You will know the full cost before booking. We take into account:
- Any earlier repairs that need removing first
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- Any details about the material
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a few hours, depending on the damage. Before leaving, we tell you when it can be used and how to care for it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Open a window if you can
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Read more
More services for Corton
Questions from Corton
How much does bath repair cost in Corton?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you redo someone else’s repair?
Normally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Can a cracked acrylic bath be fixed?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Do you cover Corton?
Yes. We work across the UK and come to Corton and the rest of Wiltshire. Send us pictures for a fixed quote, or call 0345 017 0787.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Landlord and trade work in Corton
For anyone letting property in or around Corton, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Covering Corton
Corton is about 5 miles south-east of Warminster, in Wiltshire. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. We work in 425 places in Wiltshire, from the larger towns to small villages.
We cover every part of BA12. We also cover the places around Corton: Upton Lovell (1 mile east), Sherrington (2 miles south-east), Codford St Peter (2 miles east), Codford St Mary (2 miles east) and Bapton (4 miles south-east). Larger places within reach include Salisbury (14 miles south-east), Trowbridge (12 miles north-west), Devizes (14 miles north), Westbury (8 miles north-west), Melksham (14 miles north) and Warminster (5 miles north-west).
Local landmarks in Corton
Typical jobs here are in homes near St Augustine's church. Corton’s nearest station is Warminster station, roughly 4.6 miles north-west. Nearby you’ll also find Motte and double ringwork east of Bishopstrow Farm (3 miles north-west).
Repairing versus replacing in Corton
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- Fixed prices from your pictures
- Everything repaired in place
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
See our full price list or resurfacing vs replacement cost guide.
Aftercare tips
It’s all simple stuff:
- Don’t leave razors or cans standing in the bath
- Stick to mild cleaners and a soft cloth
- Protect the bath with a towel when doing jobs nearby
- Avoid scourers, wire wool and gritty cream cleaners
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
About our accreditations · Every repair comes with a one-year guarantee.
